Custom Math Waveforms using Matlab and ADK on an Oscilloscope
The following is a list of equipment and software that is needed to do this quick MATLAB example. In the download below there is a txt file that has the instruction with where to place the MATLAB file and ADK files.
- Windows 7 oscilloscope with firmware version 6.4 or later
- MATLAB with the Instrument Control Toolbox or any other toolboxes you will use (e.g. Signal Processing Toolbox).
This example will show you how to update a txt file using the Application Development Kit (ADK) with values for your cutoff frequency. Then using a custom MATLAB filter file it will read in the values from this txt file and apply the appropriate butter worth 3rd order filter with corresponding cutoff frequencies.
This FAQ Applies to:
Applications: Using MATLAB with Tektronix Instruments
Product: MSO70404C, MSO70604C, MSO70804C, MSO71254, MSO71254C, MSO71604, MSO71604C, MSO72004, MSO72004C, DPO5054, DPO5104, DPO5204, DPO70404C, DPO7054C, DPO70604C, DPO70804C, DPO7104C, DPO71254C, DPO71604C, DPO72004C, DPO72504D, DPO7254C, DPO73304D, DPO7354C, DSA70404C, DSA70604C, DSA70804C, DSA71254C, DSA71604C, DSA72004C, DSA72504D, DSA73304D
FAQ ID : 64766View all FAQs »