CSA8000+ TDS8000+ CSA8000B+ TDS8000B+ CSA8200+ TDS8200+ DSA8200+ 80SICON+ 80SSPAR+ 80SICMX: Can IConnect perform math operations?

Question:

CSA8000+ TDS8000+ CSA8000B+ TDS8000B+ CSA8200+ TDS8200+ DSA8200+ 80SICON+ 80SSPAR+ 80SICMX: Can IConnect perform math operations?

Answer:

IConnect is capable of performing addition, subtraction, multiplication, and division of two waveforms. It will also perform integration, differentiation, and filtering of a waveform. Since a constant may be substituted for one of the waveforms, waveform math also allows convenient scaling and offsetting of waveforms.

Waveform math is executed from the computation window by choosing Waveform Math from the Compute list box. It may then be necessary to choose the desired operator from the Operator drop–down list located in the Waveforms group. Depending on the nature of the operator, it may be necessary to choose either one or two operand waveforms in the remaining drop–down list boxes in the group. Press the Compute button, and the resultant waveform will be placed in the selected waveform viewer. To use a constant as one of your operands, choose Constant from one of the waveform selection boxes, and enter the value of the constant in the text box at the end of the Computation Window.

IConnect is capable of performing addition, subtraction, multiplication, and division of two waveforms. It will also perform integration, differentiation, and filtering of a waveform. Since a constant may be substituted for one of the waveforms, waveform math also allows convenient scaling and offsetting of waveforms.

Waveform math is executed from the computation window by choosing Waveform Math from the Compute list box. It may then be necessary to choose the desired operator from the Operator drop–down list located in the Waveforms group. Depending on the nature of the operator, it may be necessary to choose either one or two operand waveforms in the remaining drop–down list boxes in the group. Press the Compute button, and the resultant waveform will be placed in the selected waveform viewer. To use a constant as one of your operands, choose Constant from one of the waveform selection boxes, and enter the value of the constant in the text box at the end of the Computation Window.

This FAQ Applies to:

Product: CSA8000B, CSA8000, TDS8000, TDS8000B, CSA8200, TDS8200, 80SICON, 80SSPAR, 80SICMX

FAQ ID : 55336

View all FAQs »
ダウンロード
ダウンロード

マニュアル、データシート、ソフトウェアなどのダウンロード:

Go to top