ダウンロード

マニュアル、データシート、ソフトウェアなどのダウンロード:

ダウンロード・タイプ
型名またはキーワード

フィードバック

検索

フィルタの選択 Type

Product Support Center

Find the latest firmware, software, drivers, manuals, brochures. specifications and technical literature.

Learning Center

Learn how to use our equipment to troubleshoot system anomalies, provide measurement insights, debug EMI, and more.

TekTalk Community Forum

Ask questions, explore products and solutions and discuss with other TekTalk members, including Tektronix engineers.

検索結果

1 - 10 ヒット数 445
  • What is the maximum floating voltage for a single-ended probe?
    Faq

    What is the maximum floating voltage for a single-ended probe?

    A single-ended probe is a ground-referenced probe. The alligator clip connected to the side of the probe is a ground reference. This allows the scope and device under test have a common reference to ground. Typically, a single-ended probe should only …
  • Single-Ended probes are mentioned for HDMI intra-pair skew measurements.  Can we use the probe P7330 for single ended measurements?
    Faq

    Single-Ended probes are mentioned for HDMI intra-pair skew measurements. Can we use the probe P7330 for single ended measurements?

    The differential input range of P7330 is ± 2.5V, but the typical HDMI signal voltage range is 2.9V to 3.3V, so it is not recommended to use the P7330 for Single ended measurements.NOTE: this applies to testing under CTS1.0,1.1,1,2 only.
  • Model 5808 Single-Pin Kelvin Probes
    Datasheet

    Model 5808 Single-Pin Kelvin Probes

    The Model 5808 Single-Pin Kelvin Probes are two single fixed-pin probes. Each probe has source and sense leads and color-coded safety banana plugs. They are designed for applications that require Kelvin resistance measurements with the convenience of …
  • P5910-P5934-P5960-Probe_Datasheet
    Datasheet

    Tektronix Logic Analyzer Probes

    Verification and debug of today's high speed digital signals requires probing solutions that can accurately acquire from a wide variety of electronic designs and protect signal fidelity. Tektronix logic analyzer probes contain a variety of …
  • Datasheet

    Passive Voltage Probes

  • Will an Active Differential probe support single ended measurements?
    Faq

    Will an Active Differential probe support single ended measurements?

    Active Differential Oscilloscope probes can be used to make single ended earth ground referenced measurements by connecting the (-) input to earth ground, and (+) input to signal.While suitable in many applications, single-ended measurements can …
  • Which probes are recommended for SATA testing?
    Faq

    Which probes are recommended for SATA testing?

    To test for SATA compliance, there is need for single ended and differential probing. The Differential skew and AC common mode measurements need a single ended probe. The Differential output voltage and Unit interval measurements need a differential …
  • Datasheet

    Passive Voltage Probes

  • What is meant by a single ended or complimentary output?
    Faq

    What is meant by a single ended or complimentary output?

    A single ended output is a signal that is always referenced to the shield (which is typically earth ground) on the output connector. This is the most common type of signal output or input. A complimentary output has both the channel and the …
  • History of Tektronix Oscilloscope Probes Infographic
    Blog Entry

    History of Tektronix Oscilloscope Probes Infographic

    Tektronix has been a leader in developing cutting-edge oscilloscope probe technology for nearly 30 years. The infographic below highlights some of the key innovations and probe features we’ve …