ダウンロード
ダウンロード

マニュアル、データシート、ソフトウェアなどのダウンロード:

ダウンロード・タイプ
型名またはキーワード

TDS3000シリーズ

最高周波数帯域500 MHz、サンプル・レート5 GS/sのTDS3000Cシリーズは、コンパクトなサイズでバッテリ動作が可能なオシロスコープであり、高速に変化する信号を観測するのに適しています。 前面パネルの専用操作ボタンと25種類の自動測定機能が装備され、操作性にも優れていますので、操作の習得に時間をとられず、実作業に集中できます。

周波数帯域

最高 500 MHz

アナログ・チャンネル数

2 または 4

レコード長(ポイント)

10k ポイント

サンプル・レート

最大 5 GS/s

 

特長

利点

デジタル・リアルタイム・サンプリング 5倍以上のオーバーサンプリングにより、信号を正確に取込むことが可能
デジタル・フォスファ表示 グリッチやまれなイベントを高速な波形取込レートで取込み、輝度階調をもってすばやく表示
拡張トリガ ラント、グリッチ、立上り/立下り時間、セットアップ/ホールド時間違反トリガなどのデジタル信号異常にトリガできる
前面パネルの専用ボタン 操作方法が簡単に覚えられ、ほとんどの操作が前面パネルから実行できる
前面パネルのUSBホスト・ポート 波形をすばやく保存し転送できる
PC接続 NI LabVIEW SignalExpress™ TE
およびTektronix OpenChoice
®
デスクトップ・ソフトウェアにより、テスト結果をすばやく転送し、解析してレポート作成が可能
奥行きわずか149 mm 貴重な作業スペースを有効利用できる
バッテリ・パック(オプション) 現場で最大3時間のバッテリ連続動作が可能
アプリケーション・モジュール(オプション) リミット・テスト、テレコム・マスク・テスト、ビデオ回路のトラブルシューティングなど、特殊な用途の計測器として使用可能

 

型名 アナログ帯域 サンプル・レート レコード長(ポイント) アナログ・チャンネル数 価格
TDS3012C 100MHz 1.25GS/s 10 Kポイント 2 US $8,750
構成と見積り
TDS3014C 100MHz 1.25GS/s 10 Kポイント 4 US $10,400
構成と見積り
TDS3032C 300MHz

2.5GS/s

10 Kポイント 2 US $12,800
構成と見積り
TDS3034C 300MHz

2.5GS/s

10 Kポイント 4 US $15,200
構成と見積り
TDS3052C 500MHz 5GS/s 10 Kポイント 2 US $19,100
構成と見積り
TDS3054C 500MHz 5GS/s 10 Kポイント 4 US $21,900
構成と見積り
型名 アナログ帯域 サンプル・レート レコード長(ポイント) アナログ・チャンネル数 価格
TDS3012C 100MHz 1.25GS/s 10 Kポイント 2 US $8,750
構成と見積り
TDS3014C 100MHz 1.25GS/s 10 Kポイント 4 US $10,400
構成と見積り
TDS3032C 300MHz

2.5GS/s

10 Kポイント 2 US $12,800
構成と見積り
TDS3034C 300MHz

2.5GS/s

10 Kポイント 4 US $15,200
構成と見積り
TDS3052C 500MHz 5GS/s 10 Kポイント 2 US $19,100
構成と見積り
TDS3054C 500MHz 5GS/s 10 Kポイント 4 US $21,900
構成と見積り
データ・シート ソフトウェア・パッケージ/ソフトウェア・オプション 概要 構成/見積り
アクセサリ 1103
データシート 概要
TekProbe電源
アクセサリ AC3000
データシート 概要
表示(View) データシート ソフト・キャリング・ケース
アクセサリ HCTEK4321
データシート 概要
表示(View) データシート ハード・キャリング・ケース
アクセサリ TDS3BATC
データシート 概要
表示(View) データシート バッテリ・パック(TDS3000シリーズ・オシロスコープ用)
アクセサリ TDS3GV
データシート 概要
表示(View) データシート モジュール、通信モジュール、GPIB、VGA、RS-232
データシート アクセサリ 概要
表示(View) データシート 1103 TekProbe電源
AC3000 ソフト・キャリング・ケース
HCTEK4321 ハード・キャリング・ケース
TDS3BATC バッテリ・パック(TDS3000シリーズ・オシロスコープ用)
TDS3GV モジュール、通信モジュール、GPIB、VGA、RS-232
デジタル・フォスファ・オシロスコープ
TDS3000Cシリーズは、手頃な価格で優れた性能を実現するデジタル・フォスファ・オシロスコープです。周波数帯域は100MHzから500MHz、サンプル・レートは最高5GS/sであり、優れた測定再現性を実現します。

文書番号: 41Z-12482-26
Datasheet
TDS3000C Series
Oscilloscope Compliance and Safety

This document covers compliance and safety information and basic information about installation and safe use of the oscilloscope.


部品番号: 071357800
User Manual
TDS3000C Series
Digital Phosphor Oscilloscopes

This TDS3000C series user manual explains how to operate the oscilloscope and includes installation procedures. It also provides information about features and functions.


部品番号: 071230807
User Manual
TDS3000C Series
Digital Phosphor Oscilloscopes User Manual

This TDS3000C series user manual explains how to operate the oscilloscope and includes installation procedures. It also provides information about features and functions.
部品番号: 071230805
主要ユーザ Manual
TDS3000C Series
Digital Phosphor Oscilloscopes User Manual

This TDS3000C series user manual explains how to operate the oscilloscope and includes installation procedures. It also provides information about features and functions.
部品番号: 071230803
主要ユーザ Manual
TDS3000C Series
Digital Phosphor Oscilloscopes Specifications and Performance Verification Technical Reference

This document provides operational specifications for the TDS3000C series products and explains how to verify that the products are performing according to the specifications.
部品番号: 071250802
性能検査 Manual
TDS3000, TDS3000B & TDS3000C Series
Digital Phosphor Oscilloscopes Programmer Manual

This document describes commands that can be used to remotely control the product.
部品番号: 071038103
プログラマ Manual
TDS3000C Series
Digital Phosphor Oscilloscopes Service Manual

This document provides information for technicians to maintain or service a product. Information is given to the module level, and may include product care and cleaning tips, troubleshooting information, adjustments, and how to replace parts.
部品番号: 071250700
サービス Manual
TDS3000C Series
Digital Phosphor Oscilloscopes Instructions

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.
部品番号: 077009100
機密解除 Manual
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

部品番号: 066093812
Driver
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

部品番号: 066093811
Driver
Tektronix Openchoice Desktop Application TDSPCS1 - v2.6
The Tektronix OpenChoice Desktop free application lets you capture oscilloscope screen images, waveform data, and settings from a Microsoft Windows computer. After installing the software, refer to the section “Connecting to a PC” in your …

部品番号: 066093914
Utility
FIRMWARE UPGRADE FOR TDS3000C SERIES OSCILLOSCOPES - V4.31
The image for TDS3KC

部品番号: 063415807
Firmware
Tektronix Toolbars for Microsoft Office 32 bit - V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for the 32 bit versions of Microsoft Excel and Microsoft Word. This version of Toolbars requires OpenChoice TekVISA v4.0.4 (Part Number 066093809) to be preinstalled on the PC …

部品番号: 066133202
Utility
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

部品番号: 066093809
Driver
FIRMWARE UPGRADE FOR TDS3KC SERIES OSCILLOSCOPES V4.26
FIRMWARE UPGRADE FOR TDS3KC SERIES OSCILLOSCOPES TO FIX THE ISSUE OF XSS IN E*SCOPE.

部品番号: 063415805
Firmware
FIRMWARE UPGRADE FOR TDS3KC V4.25
FIRMWARE UPGRADE FOR TDS3KC SERIES OSCILLOSCOPES TO SUPPORT THE SEIKO DPU-S445 PRINTER.

部品番号: 063415804
Firmware
NI SIGNALEXPRESS TEKTRONIX EDITION v2.5.1
National Instruments SignalExpress(tm) Tektronix Edition provides the industry's first true USB plug-n-play connectivity for instrumentation offering an intuitive drag-and-drop user interface that does not require any programming. SignalExpress(tm) …

部品番号: 066077003
Application
Be Sure to Capture the Complete Picture
If an oscilloscope's sample rate isn't fast enough, transient signal details are lost, resulting in errors. Digital real-time oscilloscopes acquire signals in real time, capturing enough samples of the signal needed to faithfully reconstruct a …

文書番号: 3GK-17741-0
アプリケーション・ノート Marketing Document
Tektronix Probe Selection Guide
Tektronix probes ensure the highest signal fidelity possible from your device-under-test to your oscilloscope. With over 100 probe choices available, all perfectly matched to our industry-leading oscilloscopes, you can find the probe you need for …

文書番号: 60W_14232_10
製品選択ガイド Marketing Document
Tektronix Named “Test of Time” Finalist
受賞ニュース Marketing Document
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
FAQ ID64791 Faq
What is the difference between the P6139A and the P6139B?
From a specifications perspective, the probes are identical. Both are 500 MHz, 10X passive probes. The P6139B can be used on oscilloscopes that shipped with the P6139A.From a mechanical perspective, there are some differences:- Sharper tip- Ground …
FAQ ID64441 Faq
How do I connect to my Oscilloscope via an Ethernet connection with NI-VISA?
Connecting via NIVISA has the same end effect to connecting to your instrument via TekVISA, but the method is different. Here is a step-by-step tutorial, using a TDS3000B connected through Ethernet, and NIVISA version 4.0.2. 1. Open National …
FAQ ID63526 Faq
Which record length selection is best to use?
10K record length is best for signals characterized by: Large amount of horizontal detail Stable or slow changing Single shot 500 point or Fast Trigger is best for signals with: Higher trigger repetition rate …
FAQ ID61421 Faq
Can the P6139B be used on scopes that shipped with a P6139A? What is the difference between the P6139A and the P6139B?
From a specifications perspective, the probes are identical. Both are 500 MHz, 10X passive probes. The P6139B can be used on oscilloscopes that shipped with the P6139A. From a mechanical perspective, there are some differences: - Sharper tip …
FAQ ID58111 Faq
How to save an image on the TDS3000C series scope?
Setup: First, select the Utility button, then select the System button from the menu below the display. Toggle the System button and highlight Hard Copy, select Format from the same lower menu. In the Format menu select BMP, PCX or TIFF. From the …
FAQ ID60731 Faq
Why does OpenChoice Desktop "Get Screen" operation time-out and display "Data transfer ended unexpectedly", when “Select Instrument”, “Get Data”, “Get & Send Settings” operations are successful?
When connecting to a TPS2000/B, TDS1000, TDS2000, or TDS3000/B series scopes with a Centronics parallel printer port using direct RS232, or RS232 to USB adapter, you must set the scope’s Printer Port to “RS232” (TDS1000/2000, TPS2000/B; Utility …
FAQ ID64806 Faq
When I plug in my TDS3EM module into my TDS3014B/C scope+ I get a message telling me there is a hardware conflict. Why is that?
The TDS3000B/C family already has an Ethernet connection built in. So when a TDS3EM module is installed there would be two ethernet (LAN) connections, which is not allowed.
FAQ ID64271 Faq
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital …
FAQ ID60306 Faq
I have a TDS3000 scope and just connected it to the Ethernet. In the Ethernet setup menu there is a Test Connection selection. What does the Test Connection test?
The Test Connection button pings the Gateway. If the Gateway IP Address is not specified, or specified incorrectly, the Test Connection will fail. This applies whether you are using a crossover cable or a "real" Ethernet connection. The selection is …
FAQ ID55806 Faq
Can the TDS3BATC be used with (and charged in) a TDS3000 series (non B) scope+ even though the voltage is different than the TDS3BAT (14.4V vs 12V)?
TDS3BATB RECALLThe Lithium-Ion TDS3BATC will work with all TDS3000, TDS3000B, and TDS3000C scopes. However, unless the scope firmware is version 3.27 or greater, the battery charge information shown on the scope display will not be correct.
FAQ ID58126 Faq
How do I use TekVISA to send commands to my instrument?
TekVISA Download Link:TEKVISA CONNECTIVITY SOFTWARE In order to communicate with and control the scope, you can use OpenChoice Talker-Listener. Back on the Application and Utilities panel, click on OpenChoice Talker Listener and click Start …
FAQ ID69181 Faq
I purchased TDS3000/B/C series oscilloscope without any communication module. Now+ can I add a GPIB module onto my current TDS3014B? Is TDS3GV the right accessory?
The TDS3GV is the correct item to add GPIB. TDS3GV includes: GPIB, RS232, VGA interfaces and OpenChoice PC Communications software.
FAQ ID58416 Faq
Where can I find an IVI driver for TDS200+ TDS1000/TDS2000+ TDS1000B/TDS2000B+ TDS2000C+ TPS2000+ TDS3000/TDS3000B/TDS3000C+ DPO2000/MSO2000+ DPO3000/MSO3000+ DPO4000/MSO4000 series?
IVI drivers to support LabView, LabWindows/CVI, and LabView SignalExpress can be found on the National Instruments Developer Zone, http://zone.ni.com/.For MSO3000 series please use the drivers posted for the DPO3000 series.For MSO4000 series please …
FAQ ID60176 Faq
How do I download and install the 30-day trial version of NI LabVIEW SignalExpress Tektronix Edition?
Note: NI LabVIEW SignalExpress Tektronix Edition is no longer offered by Tektronix. This FAQ is "historical only".National Instruments SignalExpress Tektronix Edition is a measurement automation tool that allows SignalExpress to control a Tektronix …
FAQ ID66221 Faq
Is the WaveStar software Compatible with Win 7?
WaveStar is compatible with Win 7. Please refer to the attached doc for further details.
FAQ ID69501 Faq
What communication modules can I use with my oscilloscope?
Please go to the "Supported Data Interfaces" section of www.tek.com/products/oscilloscopes/supported_printers.pdf.
FAQ ID64051 Faq
What is TekVISA and how can I use it to communicate with and control my instrument?
VISA is an acronym that stands for Virtual Instrument Software Architecture. In a nutshell, VISA handles the communications between your computer’s OS and the instrument.  You may be familiar with TekVISA, which is Tektronix’s own brand of VISA …
FAQ ID69176 Faq
I am using the Define Units function in Advanced Math (TDS3AAM) and it is not showing up in the display. Why?
The Define Units function only takes effect when your Math Expression units result contain a “?”, such as “m?”. When this happens your Defined Unit will replace the “?”. i.e.  m? would become mPSI if PSI was your defined unit.
FAQ ID52831 Faq
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
FAQ ID474266 Faq
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the …
FAQ ID69186 Faq
My TDS3000B scope is set up to print to a network printer and every time I print I get a header page. How can I turn off the header page?
To turn the header page off consult your printer operation manual.
FAQ ID56781 Faq
On the TDS3000C scopes+ can the USB port be used for remote control?
No. This port is only used for data storage to a memory stick.
FAQ ID61026 Faq
I have captured waveform data as .isf files. I want to know which software can convert .isf to .png or .jpg.
If the .isf file was captured on the DPO2000/MSO2000, DPO3000/MSO3000, DPO4000/MSO4000 series scope, you could open it with OpenChoice Desktop software. Or you could recall the waveform into the scope as a reference waveform, and then save on the …
FAQ ID61871 Faq
How do I connect to an Oscilloscope over Ethernet with TekVISA?
Please download the following document.  
FAQ ID63521 Faq
What is the TekProbe interface?
In addition to coupling the signal from the probe to the oscilloscope the TekProbe interface provides power and offset to active probes. It also allows the oscilloscope to sense the probe's attenuation factor and/or probe type such as a 100X probe or …
FAQ ID58876 Faq
Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support …
FAQ ID63266 Faq
What Video test capabilities does the TDS3000/B/C+ TDS3VID+ TDS3SDI offer?
The following comparison shows the different video test capabilities of the standard TDS3000/B series Oscilloscopes, and optional TDS3VID, or TDS3SDI modules.Model / Option:TDS 3XXX, TDS 3XXXBTDS 3VID (Software) TDS 3SDI (Hardware) + (TDS 3VID …
FAQ ID55081 Faq
For the TDS5000 and TDS5000B scope+ along with the TDS3000 and TDS30000B series scopes+ the video trigger is for 720P/60. How can it be used for 720P/50 format?
For the TDS3000 series, you must have the TDS3VID to do HDTV triggering. For all of these scopes, setting the trigger to 720/60 will allow the scope to properly trigger on the 50 Hz rate as well as the 60/59.94 rates.
FAQ ID57256 Faq
How do connect my Color Difference Component Analog Video signals to the TDS3000/B Scope with TDS3VID or TDS3SDI Video module to get a Vectorscope display?
Please refer to the Hook-up document links below for connection descriptions, and to the Module User Manuals for Quick Menu setup details. TDS3VID Hookups (7Kb) TDS3SDI Hookups With Serial Digital Video (7Kb) TDS3SDI Hookups With Non-Serial …
FAQ ID58251 Faq
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can …
FAQ ID64561 Faq
Are LabView drivers available for the TDS3000 series scopes?
Drivers for the TDS3000 series oscilloscopes can be found on the National Instruments web site, at the following link:TDS3000 Series Drivers and search with the scope model number.
FAQ ID58036 Faq
I am trying to use RS232 communication to my scope and it is not working. What can I do to fix it?
The following is a trouble shooting guide which goes through the possible issues and how to fix them. Getting Started If you’re having communications problems between your PC and Oscilloscope this document provides the steps to help you get the …
FAQ ID56651 Faq
I saved some oscilloscope .wfm and .isf files+ how do I view them on my pc?
The .isf and .wfm is the internal file format.  It is designed to be recalled as the reference waveform on the oscilloscope.   The Tektronix OpenChoice Desktop software may be able to open some of the .isf and .wfm file depends on the model of …
FAQ ID59571 Faq
What Video test capabilities does the TDS3000/B/C+ TDS3VID+ TDS3SDI offer?
The following comparison shows the different video test capabilities of the standard TDS3000/B series Oscilloscopes, and optional TDS3VID, or TDS3SDI modules.Model / Option:TDS 3XXX, TDS 3XXXBTDS 3VID (Software) TDS 3SDI (Hardware) + (TDS 3VID …
FAQ ID53661 Faq
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker …
FAQ ID247211 Faq
How can I change the TekVISA Instrument descriptor “device name” used to identify the oscilloscopes to which I routinely connect?
Open TekVISA V4.0.0+ OpenChoice Instrument Manager by selecting Start -> All Programs -> TekVISA ->  OpenChoice Instrument Manager.Select (highlight) the Instrument descriptor listed in the Instruments list for the connected Oscilloscope.Click the …
FAQ ID66181 Faq
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689 …
FAQ ID64571 Faq
Is it possible to use an oscilloscope to time NTSC black Burst and HD tri-level sync?
See document at left.
FAQ ID58481 Faq
What is the export code for the TDS3054B?
The export codes are listed on the Tektronix web site. Here is the link to the search engine. /export_codes.
FAQ ID58791 Faq
My scope and PC are connected to a LAN.  How can I establish a peer to peer connection to my PC via the scope's Ethernet port.
Certainly. A crossover cable or Ethernet Hub can be used to make a direct Peer-to-Peer connection from the scope's Ethernet port to the PC's Ethernet port. The concept is similar to using a null modem cable to connect a scope to a PC via RS-232. A …
FAQ ID61916 Faq
How do I utilize the measurement features on a TDS3000C series oscilloscope?
There are many features and fuctionalities that come with making measurements on the TDS3000C and older model scopes. Many of these inlcude "gating" your measurements to a certain part of your waveform or the full screen or between cursors. Sometimes …
FAQ ID64676 Faq
How do I connect my TDS3000B series oscilloscope to my LAN?
The Ethernet port is located on the rear panel of the scope in the upper left rear corner. Connect the TDS3000B series to a Ethernet port or to a hub with an Ethernet cable and power the scope up. When the scope completes it's bootup, Press …
FAQ ID60681 Faq
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the …
FAQ ID63686 Faq
What operating system does the TDS1000B+ TDS2000B+ TPS2000+ MSO/DPO2000+ TDS3000C+ MSO/DPO3000 and MSO/DPO4000 use? And are they susceptible to viruses?
The above oscilloscopes use closed embedded real-time operating systems and do not have the capability to create, modify, run or save programs that are on a USB device or LAN .  Therefore, they are not susceptible to virus attacks and cannot spread …
FAQ ID56996 Faq
Can I convert my wfm files to an open format+ such as a CSV (comma separated values) file?
You can use one of the following three WFM to ASCII converters. Converter for TDSxxx - works with files created by TDSx00 series (for example, TDS500 series) Converter for TDS5xxx,TDS6xxx, TDS7xxx, DPO7xxx,DPO70xxx, DSA70xxx Converter for the …
FAQ ID56386 Faq
How do I connect my TDS3000B/TDS3000C Series oscilloscope to a network printer?
First be sure the oscilloscope is on the LAN, then go to the oscilloscope's Utility/System/Hardcopy menu and select the Format appropriate to your network printer (For example the Lexmark Optra Lxi is a postscript printer, so a user of that printer …
FAQ ID60686 Faq
What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 …
FAQ ID64251 Faq
I am using the Define Units function in Advanced Math (TDS3AAM) and it is not showing up in the display. Why?
The Define Units function only takes effect when your Math Expression units result contain a “?”, such as “m?”. When this happens your Defined Unit will replace the “?”. i.e.  m? would become mPSI if PSI was your defined unit.
FAQ ID54251 Faq
What is the format of the .isf file?
The ISF format is the same as what the scope would send in response to the WAVFrm? command via an external program.The response to the WAVFrm? command is documented in the programmers manual for your instrument, which you can download from the …
FAQ ID54941 Faq
What are the differences between the TDS3000, TDS3000B and TDS3000C series oscilloscope?
There are several added functions and specs from TDS3000 to TDS3000B series as detailed below: Added WaveAlert............waveform anomaly detection Added E*Scope..............web based remote control Ethernet port is now standard Added an …
FAQ ID58631 Faq
Programing - How to get and plot a waveform from DPO/MSO/MDO4000 Series scope in Python
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
FAQ ID64796 Faq
Is it safe to operate the TDS3000 without connecting it to ground?
Yes, the TDS3000 can be safely floated to 30V RMS, while running on battery power. To make floating measurements on higher voltages a high voltage differential probe is recommended.
FAQ ID60896 Faq
Why do I get a flat line signal in Vectorscope Display Mode when I apply a 75% or 100% Color Bar Composite Video signal to Channel 1 of my TDS3000 series scope with TDS3VID or TDS3SDI Video module?
The TDS3VID, or TDS3SDI Vectorscope feature only supports Component Video signals. You must apply a Color Difference Component Analog Video signal, for example; Y,Pb,Pr to two input channels on the TDS3000/B Scope which uses XY mode to produce the …
FAQ ID59016 Faq
How can I obtain the Open Choice Desktop software?
This [embed-software_word:0660939] is available for a free download from the Tektronix web site.This software also be available on some CDs that are shipped with some of our TDS or DPO/MSO oscilloscopes; however, may be an earlier version.  If so …
FAQ ID58236 Faq
Does the ADA400A Differential Preamplifier work the TDS3000+TDS3000B+ and TDS3000C series of oscilloscopes?
Yes, the ADA400A will work with any oscilloscope that has the TekProbe interface. This includes the TDS3000 and TDS3000B families. The data sheet for the ADA400A was written before these products existed, so they were not mentioned.
FAQ ID63381 Faq
What flash drives or USB sticks will work with my TDS3000C?
While Tektronix is not able to test all USB memory devices with all Tektronix products here is a listing of flashdrives that have been tested with the TDS3000Cs.
FAQ ID60011 Faq
What is the format of the .isf file?
The ISF format is the same as what the scope would send in response to the WAVFrm? command via an external program.The response to the WAVFrm? command is documented in the programmers manual for your instrument, which you can download from the …
FAQ ID53511 Faq
コミュニケーションモジュールなしでTDS3000Bシリーズを購入しました。GPIBを使うのに、アクセサリとしてTDS3GVを購入すれば良いのですか?
はい、GPIBをご利用になるには、TDS3GVをご購入いただければ良いです。TDS3GVはGPIB、RS232、VGAインタフェースとTDSPCS1 OpenChoiceソフトウエアが付属します。 
FAQ ID65651 Faq
LANを使っていないが、オシロスコープとPCをイーサネットポートでピアツーピアで接続したい。可能ですか?
はい可能です。クロスケーブルかハブを使い、オシロスコープとPCのイーサネットポートをピアツーピアで接続することが出来ます。RS-232接続の例で云えば、ヌルモデムケーブルをご利用いただくのと同じです。ピアツーピア接続では、PC、オシロスコープとも、それぞれ固有のIPアドレスとサブネットマスクが必要となります。オシロスコープの「ユーティリティ」メニュより、「システム - IO -イーサネットネットワークの設定」でDHCPをオフにしてください。機器の設定で、「IP、DNS IP、GatewayIP …
FAQ ID64966 Faq
オシロスコープで信号が見えません。どうしたら良いですか?
まずオシロスコープが正常動作しているか確認します。できればオシロスコープに付属していた受動プローブを使い、オシロスコープ前面のプローブ補正へ接続します。初期設定を行い、オートセットを実行します。この時、1kHzのパルス波が見えるはずです。見えない時は、接続をチェックし、それでも見えない場合は、ダイアグを実行してください。プローブ補正信号が見える場合は、オシロスコープは正しく動作しています。再度観測した信号を接続し、オートセットボタンを押してください。信号が見えない場合は …
FAQ ID66036 Faq
TDS3000を使い、イーサネットに接続をしています。イーサネットの設定に、「接続テスト」とありますが、これは何ですか?
「接続テスト」ボタンでゲートウェイへpingします。ゲートウェイのIPアドレスが特定されていない、もしくは正しくない場合、接続テストは失敗します。クロスケーブルや純正のイーサネット接続をお使いの時に適用されます。オシロスコープとの接続の確認では必要ありません。「接続テスト」ボタンはゲートウェイへのpingの時だけご利用いただくものです。 
FAQ ID66051 Faq
TEKPROBEインタフェースとは何ですか?
プローブからオシロスコープへTekProbeインタフェースを介して、信号を入力することに加え、電源供給とアクティブプローブのオフセット情報を伝えます。また、プローブの減衰比や100×プローブや電流プローブなどといったプローブの種類の情報も送ります。テクトロニクスのオシロスコープでは、TekProbeインタフェースを持つ機種は、TDS400、TDS500、TDS600、TDS700、TDS3000/B、TDS5000/BシリーズとTDS7104、TDS7054になります。Figure 1: …
FAQ ID65751 Faq
TDS3000/BシリーズにLabVIEWのドライバは使用できますか?
TDS3000/Bシリーズのドライバは、ナショナルインスツルメンツ社のホームページからダウンロードできます。下記よりアクセスしてください。TDS3000 Series Drivers
FAQ ID65671 Faq
レコード長を選ぶ最適なポイントは何ですか?
10kポイントを選ぶのが良い例。長時間にわたり細かな変動をする信号安定しているまたは、緩やかな変動のある信号単発信号500ポイント、またはファストトリガを選ぶのが良い例。高速な繰り返し信号急峻な変動のある信号変調信号
FAQ ID65571 Faq
TDS3000Bに差動増幅器ADA400Aを使うことはできますか。
ADA400Aは電源係数が5のため、2台まで接続できます。ADA400A型を3台または4台の場合には、1103型電源とBNCケーブルが必要です。
FAQ ID66066 Faq
TDS3000Bでネットワークプリンタに設定すると、毎回ヘッダーページが印刷される。ヘッダーページを印刷しない方法はありますか?
プリンタの取り扱い説明書の「ヘッダーページを印刷しない」をご参照ください。 
FAQ ID65761 Faq
TDS3000/BやTDS5000/Bシリーズのオシロスコープでは、ビデオトリガの720P/60が選べます。720P/50はどのようにして設定するのですか?
TDS3000/Bシリーズでは、HDTVトリガを掛けるのに、TDS3VIDが必要です。オシロスコープで設定するには、720P/60を使えば、60/59.94と同様に、50Hzでもトリガが掛かります。 
FAQ ID65836 Faq
TDS3054BのExportCode(ECCN:米国輸出規制コード)は何ですか?
弊社ホームページにてご確認いただけます。下記よりアクセスしてください。http://www2.tek.com/trade/tk_export_codes.home
FAQ ID65461 Faq
グランドを取らないで、TDS3000/Bを操作しても安全ですか?
バッテリ操作で、30Vrmsまでのフローティングでしたら、安全に操作できます。高電圧のフローティング測定には、高電圧差動プローブのご利用をお勧めいたします。 
FAQ ID65586 Faq
オシロスコープに使えるコミュニケーション・モジュールは何ですか。
添付資料をご覧ください。 
FAQ ID66161 Faq
ベンチからフィールドまで あらゆる用途に
コストパフォーマンスに優れたロングセラー世界標準世界中のエンジニア、10人中8人がテクトロニクスのオシロスコープを使っています。

文書番号: 3GZ-20951-5
ファクト・シート Marketing Document
法政大学 情報科学部様
ハードウェアの知識を持つソフトウェア技術者の養成を目指し、ロジックアナライザとオシロスコープをセット導入

文書番号: 46Z-20938-0
導入事例 Marketing Document
入門書オシロスコープのすべて
この入門書では、初めてオシロスコープを使用する方を対象に、オシロスコープの基本的な機能および操作方法について説明しています。 聞きなれない用語が出てきましたら、本書の末尾の用語集でその意味を確認してください。本書には、オシロスコープの動作原理や操作についての用語テストや選択式問題が掲載されているので、教材としても適しています。数学やエレクトロニクスの知識は必要ありません。 この入門書では、以下の項目について説明します。 ■ オシロスコープの動作原理 ■ …

文書番号: 03Z-8605-7
入門書 Marketing Document
「オシロスコープの選択に必要な10ポイント」
このガイドでは、現場でのニーズに応じて、ベーシック・オシロスコープを選択する際 に最も重要な10の項目について説明します。 #1 周波数帯域 #2 サンプル・レート #3 十分な入力チャンネル数と必要なチャンネル数の選択 #4 対応プローブ #5 トリガ #6 レコード長 #7 自動測定/解析 #8 使いやすさ #9 接続性 #10 シリアル・バスのでコード 製品購入後のサポートも?

文書番号: 3GW_60848_1
パンフレット Marketing Document
テクトロニクスDPO vs アジレントMega-Zoom
テクトロニクスTDS3000B シリーズアジレントDSO6000A比較情報テクトロニクスDPO vsアジレントMega-Zoom

文書番号: 41W-18987-0
競合他社 Marketing Document
メジャメント機能の比較
テクトロニクスTDS3000B シリーズアジレントDSO6000Aシリーズ比較情報メジャメント機能

文書番号: 41W-18986-0
競合他社 Marketing Document
オシロスコープ 選定ガイド
テクトロニクスは、さまざまなアプリケーション、用途に対応したオシロスコープを数多くご用意しています。この選定ガイドでは、現在ご利用いた だけるさまざまな種類のオシロスコープの概要と、ニーズに合った正しいオシロスコープの選定の手助けになるよう、選定の際に考慮すべき主要性能や機能、各シリーズ間の主な違いをご説明しています。

文書番号: 46W-31080-7
選択ガイド Marketing Document
レコード長と測定機能の比較
テクトロニクスTDS3000B シリーズアジレントDSO6000Aシリーズ比較情報メジャメント機能

文書番号: 41W-18985-0
競合他社 Marketing Document
TDS3000C Series
Digital Phosphor Oscilloscopes

このユーザー・マニュアルでは、TDS3000Cシリーズ・オシロスコープの操作方法とインストールの手順について説明します。また、その特長や機能に関する情報も提供します。


部品番号: 077139500
主要ユーザ Manual
TDS3000C シリーズ ユーザ・マニュアル
デジタル・フォスファ・オシロスコープ User Manual

この TDS3000C シリーズ・ユーザ・マニュアルでは、オシロスコープの操作方法とインストールの手順について説明します。また、機能やアプリケーションに関する情報も提供します。
部品番号: 071231301
User Manual
TDS3AAM
Advanced Analysis Application Module User Manual

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
部品番号: 071095502
User Manual
TDS3TMT
Telecom Mask Test Application Module User Manual

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
部品番号: 071065703
User Manual
TDS3VID
Extended Video Application Module User Manual

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
部品番号: 071034603
User Manual
TDS3LIM
Limit Test Application Module User Manual

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
部品番号: 071094302
User Manual
デジタル・フォスファ・オシロスコープ
TDS3000Cシリーズは、手頃な価格で優れた性能を実現するデジタル・フォスファ・オシロスコープです。周波数帯域は100MHzから500MHz、サンプル・レートは最高5GS/sであり、優れた測定再現性を実現します。

文書番号: 41Z-12482-26
Datasheet
TDS3000C Series
Oscilloscope Compliance and Safety

This document covers compliance and safety information and basic information about installation and safe use of the oscilloscope.


部品番号: 071357800
User Manual
TDS3000C Series
Digital Phosphor Oscilloscopes

This TDS3000C series user manual explains how to operate the oscilloscope and includes installation procedures. It also provides information about features and functions.


部品番号: 071230807
User Manual
TDS3000C Series
Digital Phosphor Oscilloscopes User Manual

This TDS3000C series user manual explains how to operate the oscilloscope and includes installation procedures. It also provides information about features and functions.
部品番号: 071230805
主要ユーザ Manual
TDS3000C Series
Digital Phosphor Oscilloscopes Specifications and Performance Verification Technical Reference

This document provides operational specifications for the TDS3000C series products and explains how to verify that the products are performing according to the specifications.
部品番号: 071250802
性能検査 Manual
TDS3000C Series
Digital Phosphor Oscilloscopes User Manual

This TDS3000C series user manual explains how to operate the oscilloscope and includes installation procedures. It also provides information about features and functions.
部品番号: 071230803
主要ユーザ Manual
TDS3000, TDS3000B & TDS3000C Series
Digital Phosphor Oscilloscopes Programmer Manual

This document describes commands that can be used to remotely control the product.
部品番号: 071038103
プログラマ Manual
TDS3000C Series
Digital Phosphor Oscilloscopes Service Manual

This document provides information for technicians to maintain or service a product. Information is given to the module level, and may include product care and cleaning tips, troubleshooting information, adjustments, and how to replace parts.
部品番号: 071250700
サービス Manual
TDS3000C Series
Digital Phosphor Oscilloscopes Instructions

This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.
部品番号: 077009100
機密解除 Manual
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

部品番号: 066093812
Driver
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

部品番号: 066093811
Driver
Tektronix Openchoice Desktop Application TDSPCS1 - v2.6
The Tektronix OpenChoice Desktop free application lets you capture oscilloscope screen images, waveform data, and settings from a Microsoft Windows computer. After installing the software, refer to the section “Connecting to a PC” in your …

部品番号: 066093914
Utility
FIRMWARE UPGRADE FOR TDS3000C SERIES OSCILLOSCOPES - V4.31
The image for TDS3KC

部品番号: 063415807
Firmware
Tektronix Toolbars for Microsoft Office 32 bit - V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for the 32 bit versions of Microsoft Excel and Microsoft Word. This version of Toolbars requires OpenChoice TekVISA v4.0.4 (Part Number 066093809) to be preinstalled on the PC …

部品番号: 066133202
Utility
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various …

部品番号: 066093809
Driver
FIRMWARE UPGRADE FOR TDS3KC SERIES OSCILLOSCOPES V4.26
FIRMWARE UPGRADE FOR TDS3KC SERIES OSCILLOSCOPES TO FIX THE ISSUE OF XSS IN E*SCOPE.

部品番号: 063415805
Firmware
FIRMWARE UPGRADE FOR TDS3KC V4.25
FIRMWARE UPGRADE FOR TDS3KC SERIES OSCILLOSCOPES TO SUPPORT THE SEIKO DPU-S445 PRINTER.

部品番号: 063415804
Firmware
NI SIGNALEXPRESS TEKTRONIX EDITION v2.5.1
National Instruments SignalExpress(tm) Tektronix Edition provides the industry's first true USB plug-n-play connectivity for instrumentation offering an intuitive drag-and-drop user interface that does not require any programming. SignalExpress(tm) …

部品番号: 066077003
Application
Be Sure to Capture the Complete Picture
If an oscilloscope's sample rate isn't fast enough, transient signal details are lost, resulting in errors. Digital real-time oscilloscopes acquire signals in real time, capturing enough samples of the signal needed to faithfully reconstruct a …

文書番号: 3GK-17741-0
アプリケーション・ノート Marketing Document
Tektronix Named “Test of Time” Finalist
受賞ニュース Marketing Document
Tektronix Probe Selection Guide
Tektronix probes ensure the highest signal fidelity possible from your device-under-test to your oscilloscope. With over 100 probe choices available, all perfectly matched to our industry-leading oscilloscopes, you can find the probe you need for …

文書番号: 60W_14232_10
製品選択ガイド Marketing Document
What flash drives or USB sticks will work with my TDS3000C?
While Tektronix is not able to test all USB memory devices with all Tektronix products here is a listing of flashdrives that have been tested with the TDS3000Cs.
FAQ ID60011 Faq
What is the format of the .isf file?
The ISF format is the same as what the scope would send in response to the WAVFrm? command via an external program.The response to the WAVFrm? command is documented in the programmers manual for your instrument, which you can download from the …
FAQ ID53511 Faq
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
FAQ ID64791 Faq
What is the difference between the P6139A and the P6139B?
From a specifications perspective, the probes are identical. Both are 500 MHz, 10X passive probes. The P6139B can be used on oscilloscopes that shipped with the P6139A.From a mechanical perspective, there are some differences:- Sharper tip- Ground …
FAQ ID64441 Faq
How do I connect to my Oscilloscope via an Ethernet connection with NI-VISA?
Connecting via NIVISA has the same end effect to connecting to your instrument via TekVISA, but the method is different. Here is a step-by-step tutorial, using a TDS3000B connected through Ethernet, and NIVISA version 4.0.2. 1. Open National …
FAQ ID63526 Faq
Which record length selection is best to use?
10K record length is best for signals characterized by: Large amount of horizontal detail Stable or slow changing Single shot 500 point or Fast Trigger is best for signals with: Higher trigger repetition rate …
FAQ ID61421 Faq
Can the P6139B be used on scopes that shipped with a P6139A? What is the difference between the P6139A and the P6139B?
From a specifications perspective, the probes are identical. Both are 500 MHz, 10X passive probes. The P6139B can be used on oscilloscopes that shipped with the P6139A. From a mechanical perspective, there are some differences: - Sharper tip …
FAQ ID58111 Faq
How to save an image on the TDS3000C series scope?
Setup: First, select the Utility button, then select the System button from the menu below the display. Toggle the System button and highlight Hard Copy, select Format from the same lower menu. In the Format menu select BMP, PCX or TIFF. From the …
FAQ ID60731 Faq
Why does OpenChoice Desktop "Get Screen" operation time-out and display "Data transfer ended unexpectedly", when “Select Instrument”, “Get Data”, “Get & Send Settings” operations are successful?
When connecting to a TPS2000/B, TDS1000, TDS2000, or TDS3000/B series scopes with a Centronics parallel printer port using direct RS232, or RS232 to USB adapter, you must set the scope’s Printer Port to “RS232” (TDS1000/2000, TPS2000/B; Utility …
FAQ ID64806 Faq
When I plug in my TDS3EM module into my TDS3014B/C scope+ I get a message telling me there is a hardware conflict. Why is that?
The TDS3000B/C family already has an Ethernet connection built in. So when a TDS3EM module is installed there would be two ethernet (LAN) connections, which is not allowed.
FAQ ID64271 Faq
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital …
FAQ ID60306 Faq
I have a TDS3000 scope and just connected it to the Ethernet. In the Ethernet setup menu there is a Test Connection selection. What does the Test Connection test?
The Test Connection button pings the Gateway. If the Gateway IP Address is not specified, or specified incorrectly, the Test Connection will fail. This applies whether you are using a crossover cable or a "real" Ethernet connection. The selection is …
FAQ ID55806 Faq
Can the TDS3BATC be used with (and charged in) a TDS3000 series (non B) scope+ even though the voltage is different than the TDS3BAT (14.4V vs 12V)?
TDS3BATB RECALLThe Lithium-Ion TDS3BATC will work with all TDS3000, TDS3000B, and TDS3000C scopes. However, unless the scope firmware is version 3.27 or greater, the battery charge information shown on the scope display will not be correct.
FAQ ID58126 Faq
How do I use TekVISA to send commands to my instrument?
TekVISA Download Link:TEKVISA CONNECTIVITY SOFTWARE In order to communicate with and control the scope, you can use OpenChoice Talker-Listener. Back on the Application and Utilities panel, click on OpenChoice Talker Listener and click Start …
FAQ ID69181 Faq
I purchased TDS3000/B/C series oscilloscope without any communication module. Now+ can I add a GPIB module onto my current TDS3014B? Is TDS3GV the right accessory?
The TDS3GV is the correct item to add GPIB. TDS3GV includes: GPIB, RS232, VGA interfaces and OpenChoice PC Communications software.
FAQ ID58416 Faq
Where can I find an IVI driver for TDS200+ TDS1000/TDS2000+ TDS1000B/TDS2000B+ TDS2000C+ TPS2000+ TDS3000/TDS3000B/TDS3000C+ DPO2000/MSO2000+ DPO3000/MSO3000+ DPO4000/MSO4000 series?
IVI drivers to support LabView, LabWindows/CVI, and LabView SignalExpress can be found on the National Instruments Developer Zone, http://zone.ni.com/.For MSO3000 series please use the drivers posted for the DPO3000 series.For MSO4000 series please …
FAQ ID60176 Faq
How do I download and install the 30-day trial version of NI LabVIEW SignalExpress Tektronix Edition?
Note: NI LabVIEW SignalExpress Tektronix Edition is no longer offered by Tektronix. This FAQ is "historical only".National Instruments SignalExpress Tektronix Edition is a measurement automation tool that allows SignalExpress to control a Tektronix …
FAQ ID66221 Faq
Is the WaveStar software Compatible with Win 7?
WaveStar is compatible with Win 7. Please refer to the attached doc for further details.
FAQ ID69501 Faq
What communication modules can I use with my oscilloscope?
Please go to the "Supported Data Interfaces" section of www.tek.com/products/oscilloscopes/supported_printers.pdf.
FAQ ID64051 Faq
What is TekVISA and how can I use it to communicate with and control my instrument?
VISA is an acronym that stands for Virtual Instrument Software Architecture. In a nutshell, VISA handles the communications between your computer’s OS and the instrument.  You may be familiar with TekVISA, which is Tektronix’s own brand of VISA …
FAQ ID69176 Faq
I am using the Define Units function in Advanced Math (TDS3AAM) and it is not showing up in the display. Why?
The Define Units function only takes effect when your Math Expression units result contain a “?”, such as “m?”. When this happens your Defined Unit will replace the “?”. i.e.  m? would become mPSI if PSI was your defined unit.
FAQ ID52831 Faq
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit …
FAQ ID474266 Faq
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the …
FAQ ID69186 Faq
My TDS3000B scope is set up to print to a network printer and every time I print I get a header page. How can I turn off the header page?
To turn the header page off consult your printer operation manual.
FAQ ID56781 Faq
On the TDS3000C scopes+ can the USB port be used for remote control?
No. This port is only used for data storage to a memory stick.
FAQ ID61026 Faq
I have captured waveform data as .isf files. I want to know which software can convert .isf to .png or .jpg.
If the .isf file was captured on the DPO2000/MSO2000, DPO3000/MSO3000, DPO4000/MSO4000 series scope, you could open it with OpenChoice Desktop software. Or you could recall the waveform into the scope as a reference waveform, and then save on the …
FAQ ID61871 Faq
How do I connect to an Oscilloscope over Ethernet with TekVISA?
Please download the following document.  
FAQ ID63521 Faq
What is the TekProbe interface?
In addition to coupling the signal from the probe to the oscilloscope the TekProbe interface provides power and offset to active probes. It also allows the oscilloscope to sense the probe's attenuation factor and/or probe type such as a 100X probe or …
FAQ ID58876 Faq
Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support …
FAQ ID63266 Faq
What Video test capabilities does the TDS3000/B/C+ TDS3VID+ TDS3SDI offer?
The following comparison shows the different video test capabilities of the standard TDS3000/B series Oscilloscopes, and optional TDS3VID, or TDS3SDI modules.Model / Option:TDS 3XXX, TDS 3XXXBTDS 3VID (Software) TDS 3SDI (Hardware) + (TDS 3VID …
FAQ ID55081 Faq
For the TDS5000 and TDS5000B scope+ along with the TDS3000 and TDS30000B series scopes+ the video trigger is for 720P/60. How can it be used for 720P/50 format?
For the TDS3000 series, you must have the TDS3VID to do HDTV triggering. For all of these scopes, setting the trigger to 720/60 will allow the scope to properly trigger on the 50 Hz rate as well as the 60/59.94 rates.
FAQ ID57256 Faq
How do connect my Color Difference Component Analog Video signals to the TDS3000/B Scope with TDS3VID or TDS3SDI Video module to get a Vectorscope display?
Please refer to the Hook-up document links below for connection descriptions, and to the Module User Manuals for Quick Menu setup details. TDS3VID Hookups (7Kb) TDS3SDI Hookups With Serial Digital Video (7Kb) TDS3SDI Hookups With Non-Serial …
FAQ ID58251 Faq
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can …
FAQ ID64561 Faq
Are LabView drivers available for the TDS3000 series scopes?
Drivers for the TDS3000 series oscilloscopes can be found on the National Instruments web site, at the following link:TDS3000 Series Drivers and search with the scope model number.
FAQ ID58036 Faq
I am trying to use RS232 communication to my scope and it is not working. What can I do to fix it?
The following is a trouble shooting guide which goes through the possible issues and how to fix them. Getting Started If you’re having communications problems between your PC and Oscilloscope this document provides the steps to help you get the …
FAQ ID56651 Faq
I saved some oscilloscope .wfm and .isf files+ how do I view them on my pc?
The .isf and .wfm is the internal file format.  It is designed to be recalled as the reference waveform on the oscilloscope.   The Tektronix OpenChoice Desktop software may be able to open some of the .isf and .wfm file depends on the model of …
FAQ ID59571 Faq
What Video test capabilities does the TDS3000/B/C+ TDS3VID+ TDS3SDI offer?
The following comparison shows the different video test capabilities of the standard TDS3000/B series Oscilloscopes, and optional TDS3VID, or TDS3SDI modules.Model / Option:TDS 3XXX, TDS 3XXXBTDS 3VID (Software) TDS 3SDI (Hardware) + (TDS 3VID …
FAQ ID53661 Faq
What is the difference between Position and Offset on an oscilloscope?
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker …
FAQ ID247211 Faq
How can I change the TekVISA Instrument descriptor “device name” used to identify the oscilloscopes to which I routinely connect?
Open TekVISA V4.0.0+ OpenChoice Instrument Manager by selecting Start -> All Programs -> TekVISA ->  OpenChoice Instrument Manager.Select (highlight) the Instrument descriptor listed in the Instruments list for the connected Oscilloscope.Click the …
FAQ ID66181 Faq
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689 …
FAQ ID64571 Faq
Is it possible to use an oscilloscope to time NTSC black Burst and HD tri-level sync?
See document at left.
FAQ ID58481 Faq
What is the export code for the TDS3054B?
The export codes are listed on the Tektronix web site. Here is the link to the search engine. /export_codes.
FAQ ID58791 Faq
My scope and PC are connected to a LAN.  How can I establish a peer to peer connection to my PC via the scope's Ethernet port.
Certainly. A crossover cable or Ethernet Hub can be used to make a direct Peer-to-Peer connection from the scope's Ethernet port to the PC's Ethernet port. The concept is similar to using a null modem cable to connect a scope to a PC via RS-232. A …
FAQ ID61916 Faq
How do I utilize the measurement features on a TDS3000C series oscilloscope?
There are many features and fuctionalities that come with making measurements on the TDS3000C and older model scopes. Many of these inlcude "gating" your measurements to a certain part of your waveform or the full screen or between cursors. Sometimes …
FAQ ID64676 Faq
How do I connect my TDS3000B series oscilloscope to my LAN?
The Ethernet port is located on the rear panel of the scope in the upper left rear corner. Connect the TDS3000B series to a Ethernet port or to a hub with an Ethernet cable and power the scope up. When the scope completes it's bootup, Press …
FAQ ID60681 Faq
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the …
FAQ ID63686 Faq
What operating system does the TDS1000B+ TDS2000B+ TPS2000+ MSO/DPO2000+ TDS3000C+ MSO/DPO3000 and MSO/DPO4000 use? And are they susceptible to viruses?
The above oscilloscopes use closed embedded real-time operating systems and do not have the capability to create, modify, run or save programs that are on a USB device or LAN .  Therefore, they are not susceptible to virus attacks and cannot spread …
FAQ ID56996 Faq
Can I convert my wfm files to an open format+ such as a CSV (comma separated values) file?
You can use one of the following three WFM to ASCII converters. Converter for TDSxxx - works with files created by TDSx00 series (for example, TDS500 series) Converter for TDS5xxx,TDS6xxx, TDS7xxx, DPO7xxx,DPO70xxx, DSA70xxx Converter for the …
FAQ ID56386 Faq
How do I connect my TDS3000B/TDS3000C Series oscilloscope to a network printer?
First be sure the oscilloscope is on the LAN, then go to the oscilloscope's Utility/System/Hardcopy menu and select the Format appropriate to your network printer (For example the Lexmark Optra Lxi is a postscript printer, so a user of that printer …
FAQ ID60686 Faq
What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 …
FAQ ID64251 Faq
I am using the Define Units function in Advanced Math (TDS3AAM) and it is not showing up in the display. Why?
The Define Units function only takes effect when your Math Expression units result contain a “?”, such as “m?”. When this happens your Defined Unit will replace the “?”. i.e.  m? would become mPSI if PSI was your defined unit.
FAQ ID54251 Faq
What is the format of the .isf file?
The ISF format is the same as what the scope would send in response to the WAVFrm? command via an external program.The response to the WAVFrm? command is documented in the programmers manual for your instrument, which you can download from the …
FAQ ID54941 Faq
What are the differences between the TDS3000, TDS3000B and TDS3000C series oscilloscope?
There are several added functions and specs from TDS3000 to TDS3000B series as detailed below: Added WaveAlert............waveform anomaly detection Added E*Scope..............web based remote control Ethernet port is now standard Added an …
FAQ ID58631 Faq
Programing - How to get and plot a waveform from DPO/MSO/MDO4000 Series scope in Python
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the …
FAQ ID64796 Faq
Is it safe to operate the TDS3000 without connecting it to ground?
Yes, the TDS3000 can be safely floated to 30V RMS, while running on battery power. To make floating measurements on higher voltages a high voltage differential probe is recommended.
FAQ ID60896 Faq
Why do I get a flat line signal in Vectorscope Display Mode when I apply a 75% or 100% Color Bar Composite Video signal to Channel 1 of my TDS3000 series scope with TDS3VID or TDS3SDI Video module?
The TDS3VID, or TDS3SDI Vectorscope feature only supports Component Video signals. You must apply a Color Difference Component Analog Video signal, for example; Y,Pb,Pr to two input channels on the TDS3000/B Scope which uses XY mode to produce the …
FAQ ID59016 Faq
How can I obtain the Open Choice Desktop software?
This [embed-software_word:0660939] is available for a free download from the Tektronix web site.This software also be available on some CDs that are shipped with some of our TDS or DPO/MSO oscilloscopes; however, may be an earlier version.  If so …
FAQ ID58236 Faq
Does the ADA400A Differential Preamplifier work the TDS3000+TDS3000B+ and TDS3000C series of oscilloscopes?
Yes, the ADA400A will work with any oscilloscope that has the TekProbe interface. This includes the TDS3000 and TDS3000B families. The data sheet for the ADA400A was written before these products existed, so they were not mentioned.
FAQ ID63381 Faq
コミュニケーションモジュールなしでTDS3000Bシリーズを購入しました。GPIBを使うのに、アクセサリとしてTDS3GVを購入すれば良いのですか?
はい、GPIBをご利用になるには、TDS3GVをご購入いただければ良いです。TDS3GVはGPIB、RS232、VGAインタフェースとTDSPCS1 OpenChoiceソフトウエアが付属します。 
FAQ ID65651 Faq
LANを使っていないが、オシロスコープとPCをイーサネットポートでピアツーピアで接続したい。可能ですか?
はい可能です。クロスケーブルかハブを使い、オシロスコープとPCのイーサネットポートをピアツーピアで接続することが出来ます。RS-232接続の例で云えば、ヌルモデムケーブルをご利用いただくのと同じです。ピアツーピア接続では、PC、オシロスコープとも、それぞれ固有のIPアドレスとサブネットマスクが必要となります。オシロスコープの「ユーティリティ」メニュより、「システム - IO -イーサネットネットワークの設定」でDHCPをオフにしてください。機器の設定で、「IP、DNS IP、GatewayIP …
FAQ ID64966 Faq
オシロスコープで信号が見えません。どうしたら良いですか?
まずオシロスコープが正常動作しているか確認します。できればオシロスコープに付属していた受動プローブを使い、オシロスコープ前面のプローブ補正へ接続します。初期設定を行い、オートセットを実行します。この時、1kHzのパルス波が見えるはずです。見えない時は、接続をチェックし、それでも見えない場合は、ダイアグを実行してください。プローブ補正信号が見える場合は、オシロスコープは正しく動作しています。再度観測した信号を接続し、オートセットボタンを押してください。信号が見えない場合は …
FAQ ID66036 Faq
TDS3000を使い、イーサネットに接続をしています。イーサネットの設定に、「接続テスト」とありますが、これは何ですか?
「接続テスト」ボタンでゲートウェイへpingします。ゲートウェイのIPアドレスが特定されていない、もしくは正しくない場合、接続テストは失敗します。クロスケーブルや純正のイーサネット接続をお使いの時に適用されます。オシロスコープとの接続の確認では必要ありません。「接続テスト」ボタンはゲートウェイへのpingの時だけご利用いただくものです。 
FAQ ID66051 Faq
TEKPROBEインタフェースとは何ですか?
プローブからオシロスコープへTekProbeインタフェースを介して、信号を入力することに加え、電源供給とアクティブプローブのオフセット情報を伝えます。また、プローブの減衰比や100×プローブや電流プローブなどといったプローブの種類の情報も送ります。テクトロニクスのオシロスコープでは、TekProbeインタフェースを持つ機種は、TDS400、TDS500、TDS600、TDS700、TDS3000/B、TDS5000/BシリーズとTDS7104、TDS7054になります。Figure 1: …
FAQ ID65751 Faq
TDS3000/BシリーズにLabVIEWのドライバは使用できますか?
TDS3000/Bシリーズのドライバは、ナショナルインスツルメンツ社のホームページからダウンロードできます。下記よりアクセスしてください。TDS3000 Series Drivers
FAQ ID65671 Faq
TDS3000Bに差動増幅器ADA400Aを使うことはできますか。
ADA400Aは電源係数が5のため、2台まで接続できます。ADA400A型を3台または4台の場合には、1103型電源とBNCケーブルが必要です。
FAQ ID66066 Faq
TDS3000Bでネットワークプリンタに設定すると、毎回ヘッダーページが印刷される。ヘッダーページを印刷しない方法はありますか?
プリンタの取り扱い説明書の「ヘッダーページを印刷しない」をご参照ください。 
FAQ ID65761 Faq
TDS3000/BやTDS5000/Bシリーズのオシロスコープでは、ビデオトリガの720P/60が選べます。720P/50はどのようにして設定するのですか?
TDS3000/Bシリーズでは、HDTVトリガを掛けるのに、TDS3VIDが必要です。オシロスコープで設定するには、720P/60を使えば、60/59.94と同様に、50Hzでもトリガが掛かります。 
FAQ ID65836 Faq
TDS3054BのExportCode(ECCN:米国輸出規制コード)は何ですか?
弊社ホームページにてご確認いただけます。下記よりアクセスしてください。http://www2.tek.com/trade/tk_export_codes.home
FAQ ID65461 Faq
グランドを取らないで、TDS3000/Bを操作しても安全ですか?
バッテリ操作で、30Vrmsまでのフローティングでしたら、安全に操作できます。高電圧のフローティング測定には、高電圧差動プローブのご利用をお勧めいたします。 
FAQ ID65586 Faq
オシロスコープに使えるコミュニケーション・モジュールは何ですか。
添付資料をご覧ください。 
FAQ ID66161 Faq
レコード長を選ぶ最適なポイントは何ですか?
10kポイントを選ぶのが良い例。長時間にわたり細かな変動をする信号安定しているまたは、緩やかな変動のある信号単発信号500ポイント、またはファストトリガを選ぶのが良い例。高速な繰り返し信号急峻な変動のある信号変調信号
FAQ ID65571 Faq
メジャメント機能の比較
テクトロニクスTDS3000B シリーズアジレントDSO6000Aシリーズ比較情報メジャメント機能

文書番号: 41W-18986-0
競合他社 Marketing Document
オシロスコープ 選定ガイド
テクトロニクスは、さまざまなアプリケーション、用途に対応したオシロスコープを数多くご用意しています。この選定ガイドでは、現在ご利用いた だけるさまざまな種類のオシロスコープの概要と、ニーズに合った正しいオシロスコープの選定の手助けになるよう、選定の際に考慮すべき主要性能や機能、各シリーズ間の主な違いをご説明しています。

文書番号: 46W-31080-7
選択ガイド Marketing Document
レコード長と測定機能の比較
テクトロニクスTDS3000B シリーズアジレントDSO6000Aシリーズ比較情報メジャメント機能

文書番号: 41W-18985-0
競合他社 Marketing Document
テクトロニクスDPO vs アジレントMega-Zoom
テクトロニクスTDS3000B シリーズアジレントDSO6000A比較情報テクトロニクスDPO vsアジレントMega-Zoom

文書番号: 41W-18987-0
競合他社 Marketing Document
ベンチからフィールドまで あらゆる用途に
コストパフォーマンスに優れたロングセラー世界標準世界中のエンジニア、10人中8人がテクトロニクスのオシロスコープを使っています。

文書番号: 3GZ-20951-5
ファクト・シート Marketing Document
法政大学 情報科学部様
ハードウェアの知識を持つソフトウェア技術者の養成を目指し、ロジックアナライザとオシロスコープをセット導入

文書番号: 46Z-20938-0
導入事例 Marketing Document
入門書オシロスコープのすべて
この入門書では、初めてオシロスコープを使用する方を対象に、オシロスコープの基本的な機能および操作方法について説明しています。 聞きなれない用語が出てきましたら、本書の末尾の用語集でその意味を確認してください。本書には、オシロスコープの動作原理や操作についての用語テストや選択式問題が掲載されているので、教材としても適しています。数学やエレクトロニクスの知識は必要ありません。 この入門書では、以下の項目について説明します。 ■ オシロスコープの動作原理 ■ …

文書番号: 03Z-8605-7
入門書 Marketing Document
「オシロスコープの選択に必要な10ポイント」
このガイドでは、現場でのニーズに応じて、ベーシック・オシロスコープを選択する際 に最も重要な10の項目について説明します。 #1 周波数帯域 #2 サンプル・レート #3 十分な入力チャンネル数と必要なチャンネル数の選択 #4 対応プローブ #5 トリガ #6 レコード長 #7 自動測定/解析 #8 使いやすさ #9 接続性 #10 シリアル・バスのでコード 製品購入後のサポートも?

文書番号: 3GW_60848_1
パンフレット Marketing Document
TDS3000C Series
Digital Phosphor Oscilloscopes

このユーザー・マニュアルでは、TDS3000Cシリーズ・オシロスコープの操作方法とインストールの手順について説明します。また、その特長や機能に関する情報も提供します。


部品番号: 077139500
主要ユーザ Manual
TDS3000C シリーズ ユーザ・マニュアル
デジタル・フォスファ・オシロスコープ User Manual

この TDS3000C シリーズ・ユーザ・マニュアルでは、オシロスコープの操作方法とインストールの手順について説明します。また、機能やアプリケーションに関する情報も提供します。
部品番号: 071231301
User Manual
TDS3AAM
Advanced Analysis Application Module User Manual

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
部品番号: 071095502
User Manual
TDS3TMT
Telecom Mask Test Application Module User Manual

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
部品番号: 071065703
User Manual
TDS3VID
Extended Video Application Module User Manual

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
部品番号: 071034603
User Manual
TDS3LIM
Limit Test Application Module User Manual

This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
部品番号: 071094302
User Manual