3700A

The Model 4288-10 Rear Support Mount Kit is a rack mount kit that is intended for use with the Model 3706A System Switch/Multimeter in a standard 19-inch equipment rack. This document describes how to use this kit to support the 3706A.

The information in this section is intended only for qualified personnel. Do not perform these procedures unless you are qualified. Failure to recognize and observe standard safety precautions could result in personal injury or death due to electric

Series 3706A System Switch/Multimeter Specifications

KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments. Key Features • Save time by automating data collection of millions of readings. • Set up a multi-instrument test with the abil

KickStart Software simplifies what you need to know about your instrument so that in just minutes you can take the instrument out of the box and get real data on your device.  KickStart Software enables quick test setup and data visualization when us

Series 3700A V1.54a firmware and O/S.

"IVI-COM/IVI-C driver for 3700/3700A seriesVersion 2.2.0. Updated to support both 32-bit and 64-bit."

Series 3700A V1.53c firmware and O/S.

The Keithley Hall Effect Test Suite greatly simplifies materials testing with the Keithley 3765 plug-in card. Using the Hall Effect Test Suite, you can easily set up instruments, source settings, and measure settings for multiple test types including

"KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments. Key Features • Save time by automating data collection of millions of readings. • Set up a multi-instrument test with the ab

Keithley LXI Discovery Browser (VXI-11 only)

"KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments. Key Features • Save time by automating data collection of millions of readings. • Set up a multi-instrument test with the ab

"KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments. Key Features • Save time by automating data collection of millions of readings. • Set up a multi-instrument test with the ab

Series 3700 V1.40 Firmware, Operating System, and Release notes.

Series 3700A V1.56a mainframe firmware and OS

V1.41c Firmware and Operating System for Series 3700 Instruments

Series 3700A V1.55a mainframe firmware and OS.

Series 3700A V1.57b mainframe firmware and OS

This file will be a link in the html page that describes the system time and date leap year problem and has the instructions for upgrading etc.

Keithley I/O Layer version C10 (KIOL-850C10 adds support for Windows 10 Operating System and installs NI-VISA Runtime 17.5 and NI-ICP 17.0. This release replaces previous versions of KIOL-850B07, KIOL-850C02, KIOL-850C03, KIOL-850C04, KIOL-850C05, KI

Keithley I/O Layer version C07 (KIOL-850C07 adds a change to only send the :syst:rem command to RS-232 connections This release replaces previous versions of KIOL-850B07, KIOL-850C02, KIOL-850C03, KIOL-850C04, KIOL-850C05, KIOL-850C06). This version

"Keithley Instruments Test Script Builder (TSB) is a software tool that simplifies building and creating test scripts. It includes built-in color coding, debugging tools, and error handling. You can use TSB to perform the following operations: -

"Keithley Instruments Test Script Builder (TSB) is a software tool that simplifies building and creating test scripts. It includes built-in color coding, debugging tools, and error handling. You can use TSB to perform the following operations: -

Model 3722 Dual 1x48 High Density Multiplexer Specifications

Model 3731 6x16 High-Speed Reed Matrix Specifications

Model 3720 Dual 1x30 Multiplexer Specifications, Rev. C

Model 3730 6x16 Matrix Specifications, Rev. C

Complete guide to selecting Tektronix and Keithley digital multimeters (DMMs) including features, benefits, measurement capabilities, and comparison of models.

This applications brief examines how to evaluate the advantages and disadvantages of various sensor types and the instrumentation options available so that sensor outputs result in accurate and reliable measurements.

Model 3750 Multifunction I/O Card Specifications

Model 3724 Dual 1x30 FET Multiplexer Specifications

Model 3740 32 Channel Isolated Switch Card Specifications

Model 3723 Dual 1x30 High Speed Multiplexer Specifications

Model 3721 Dual 1x20 Channel Multiplexer Specifications, Rev. D

This document contains specifications and supplemental information for the Model 3765 Hall Effect Card. Specifications are the standards against which the Model 3765 is tested. Upon leaving the factory, the Model 3765 meets these specifications. 

This document contains specifications information for the Model 3762 10-channel High Voltage Multiplexer Card. Specifications are the standards against which the Model 3762 is tested. Upon leaving the factory, the Model 3762 meets these specification

This document contains specifications information for the Model 3760 10-channel High Current Multiplexer Card. Specifications are the standards against which the Model 3760 is tested. Upon leaving the factory, the Model 3760 meets these specification

This document contains specifications information for the Model 3761 10-channel Low Current Multiplexer Card. Specifications are the standards against which the Model 3761 is tested. Upon leaving the factory, the Model 3761 meets these specifications

Electromechanical (EM) relays are the most common type of switch used in multiplexing modules that connect to devices-under-test (DUTs) or sensors in multi-channel data acquisition (DAQ) systems. Although EM relays are quite satisfactory in which usi

1. Configure the cables and connector and units. A. Connect four triax to alligator clip cables from Model 3765 input 1,2,3,4 to the sample(DUT). Usually, you can use Model 237-ALG-2 triax to alligator clip cables. B. Connect low noise BNC Cable(mode

ニーズに合った適切なデジタル・マルチメータの選定の手助けになるよう、DC電圧測定、AC電圧測定、抵抗測定、DC電流測定、AC電流測定またその他の測定スペックを一覧で比較でき、最適なデジタル・マルチメータをお選びいただけます。

User Manual

User Manual

User Manual

User Manual

User Manual

User Manual

User Manual

Model 3761 10-Channel Low Current Multiplexer Card User's Manual

User Manual

3700A Switch and Control Cards Reference Manual contains card installation and operation instructions for the following models: 3720, 3721, 3722, 3723, 3724, 3730, 3731, 3732, 3740, 3750 Reference

The Series 3700A System Switch/Multimeter features scalable, instrument grade switching and multi-channel measurement solutions that are optimized for automated testing of electronic products and components. The Series 3700A includes four versions of

Series 3700A System Switch/Multimeter Quick Start Guide Quick Start User Manual

Safety Precautions PA

Series 3700A System Switch Multimeter User's Manual User Manual

User Manual

The Model 3765 Hall Effect Card is a 4x5 matrix card for use in the Model 3706A SystemSwitch/Multimeter.

This manual describes how to use the Model 3760.

User Manual