ダウンロード
ダウンロード

マニュアル、データシート、ソフトウェアなどのダウンロード:

ダウンロード・タイプ
型名またはキーワード

TPS2000シリーズ

最高周波数帯域200 MHz、最高サンプル・レート2 GS/sのTPS2000Bシリーズは、さまざまな測定環境で安全なフローティング測定、差動測定が行えます。 独立した最大4チャンネルの絶縁フローティング測定が可能です。バッテリで使用することもでき、TPS2000Bデジタル・オシロスコープ・シリーズを使用すると、エンジニアが電気、電源システムの現場で直面するさまざまな課題を迅速、的確に解決します。すべての製品は安全性を念頭において設計されています。

周波数帯域

最高 200 MHz

アナログ・チャンネル数

2 または 4
(絶縁)

レコード長(ポイント)

2.5k ポイント

バッテリ

 

特長

利点

4つの絶縁チャンネル 三相電力測定を含む、4チャンネルのフローティング測定を安全/簡単に行える
デジタル・リアルタイム・サンプリング 常時、全チャンネルで10倍以上のオーバーサンプリングによって正確に信号を取込み可能
前面パネルの専用ボタン 操作方法が簡単に覚えられ、ほとんどの操作が前面パネルから実行できる
前面パネルのCompactFlash™ポート 波形をすばやく保存し転送できる
ホットスワップ可能なバッテリ・パック 最長8時間**の連続バッテリ動作で、現場の作業を継続可能
わずか2.7 kg 軽量コンパクトな設計で、研究室間や現場で簡単に持ち運び可能
パワー測定/解析アプリケーション・モジュール(オプション) 皮相電力/有効電力、位相角度測定、高調波、スイッチング損失の自動測定を迅速に実行
PC接続 RS-232ポートと付属のUSBアダプタ・ケーブルを使用して、パソコンに簡単に接続可能。NI LabVIEW SignalExpressソフトウェアを使用して、オシロスコープを制御し、データを記録、その結果を転送して文書化が可能

** 標準で1個のバッテリが付属しており、 各バッテリで4時間動作します。

型名 アナログ帯域 サンプル・レート レコード長(ポイント) アナログ・チャンネル数 価格
TPS2012B 100MHz 1GS/s 2.5 Kポイント 2 US $4,210
構成と見積り
TPS2014B 100MHz 1GS/s 2.5 Kポイント 4 US $5,570
構成と見積り
TPS2024B 200MHz 2GS/s 2.5 Kポイント 4 US $5,820
構成と見積り
型名 アナログ帯域 サンプル・レート レコード長(ポイント) アナログ・チャンネル数 価格
TPS2012B 100MHz 1GS/s 2.5 Kポイント 2 US $4,210
構成と見積り
TPS2014B 100MHz 1GS/s 2.5 Kポイント 4 US $5,570
構成と見積り
TPS2024B 200MHz 2GS/s 2.5 Kポイント 4 US $5,820
構成と見積り
データ・シート ソフトウェア・パッケージ/ソフトウェア・オプション 概要 構成/見積り
Digital Storage Oscilloscopes
The TPS2000B Series offers a distinctive range of capabilities in an oscilloscope with controls and menus you will find familiar and easy to use. Available in 2- or 4-channel versions, the TPS2000B Series with IsolatedChannel™ technology provides is

文書番号: 3MW-17750-14
Datasheet 04 Feb 2020
LabVIEW SignalExpress Step for TDS1000B, B-SC, C, C-EDU, TDS2000B, C
This Step provides the capability to connect, control and log data from the TDS1000B, B-SC, C and C-EDU; TDS2000B and C; and TPS2000B series instruments from the Signal Express Environment.

部品番号: 066130301
Software 04 Feb 2020
FIRMWARE UPDATE FOR TPS2000 and TPS2000B models
This firmware v11.09 is compatible with all TPS2000 and some TPS2000B models. See release notes for detailed Serial Number information on which TPS2000B models are supported by this firmware. All other TPS2000B models either contain the latest firmwa

部品番号: 066139100
Software 04 Feb 2020
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various c

部品番号: 066093812
Software 04 Feb 2020
Tektronix Openchoice Desktop Application TDSPCS1 - v2.6
The Tektronix OpenChoice Desktop free application lets you capture oscilloscope screen images, waveform data, and settings from a Microsoft Windows computer. After installing the software, refer to the section “Connecting to a PC” in your instrument’

部品番号: 066093914
Software 04 Feb 2020
Tektronix Toolbars for Microsoft Office 32 bit - V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for the 32 bit versions of Microsoft Excel and Microsoft Word. This version of Toolbars requires OpenChoice TekVISA v4.0.4 (Part Number 066093809) to be preinstalled on the PC

部品番号: 066133202
Software 04 Feb 2020
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various

部品番号: 066093809
Software 04 Feb 2020
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various c

部品番号: 066093811
Software 04 Feb 2020
Be Sure to Capture the Complete Picture
If an oscilloscope's sample rate isn't fast enough, transient signal details are lost, resulting in errors. Digital real-time oscilloscopes acquire signals in real time, capturing enough samples of the signal needed to faithfully reconstruct a wavefo

文書番号: 3GK-17741-0
アプリケーション・ノート 04 Feb 2020
New Approach to Quick, Accurate, Affordable Floating Measurements
Engineers and technicians often need to make “floating” measurements where neither point of the measurement is at ground(earth) potential. This measurement is often referred to as a differential measurement. “Signal common” may be elevated tohundreds

文書番号: 3MW-17773-1
アプリケーション・ノート 04 Feb 2020
Fundamentals of Floating Measurements and Isolated Input Oscilloscopes
This guide will provide you with a fundamental glossary of power measurement terms, explain the different options available for making floating measurements, and highlight the advantages and trade-offs of each option.

文書番号: 3AW-19134-2
アプリケーション・ノート 04 Feb 2020
Tektronix Probe Selection Guide
Tektronix probes ensure the highest signal fidelity possible from your device-under-test to your oscilloscope. With over 100 probe choices available, all perfectly matched to our industry-leading oscilloscopes, you can find the probe you need for yo

文書番号: 60W_14232_10
製品選択ガイド 04 Feb 2020
Why does OpenChoice Desktop "Get Screen" operation time-out and display "Data transfer ended unexpectedly", when “Select Instrument”, “Get Data”, “Get & Send Settings” operations are successful?
When connecting to a TPS2000/B, TDS1000, TDS2000, or TDS3000/B series scopes with a Centronics parallel printer port using direct RS232, or RS232 to USB adapter, you must set the scope’s Printer Port to “RS232” (TDS1000/2000, TPS2000/B; Utility, Opti
FAQ ID64806 15 Jan 2020
Can I convert my wfm files to an open format+ such as a CSV (comma separated values) file?
You can use one of the following three WFM to ASCII converters. Converter for TDSxxx - works with files created by TDSx00 series (for example, TDS500 series) Converter for TDS5xxx,TDS6xxx, TDS7xxx, DPO7xxx,DPO70xxx, DSA70xxx Converter for the TDS
FAQ ID56386 15 Jan 2020
How do I declassify or sanitize my instrument?
Declassification and Security documents for many Tektronix products are located in the Download, Manuals and Documentation on Tek.com.  /node/7106.  Enter your instrument model number and select Download Type as "Manuals".  At the results screen, on
FAQ ID55686 15 Jan 2020
Can I look at and measure an instantaneous power waveform?
With the TPS2000's math multiply function, you can easily multiply a voltage and current waveform to obtain an instantaneous power waveform. You can independently scale this math waveform for optimized viewing. In addition, you can make power measure
FAQ ID58081 15 Jan 2020
I have never used an isolated channel oscilloscope+ what advantage can I expect to gain from it?
The TPS2000 Series 4 IsolatedChannel™ input architecture provides true and complete channel-to-channel isolation for both the positive input and the negative reference leads, including the external trigger input. Refer to the IsolatedChannel Technolo
FAQ ID58386 15 Jan 2020
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit
FAQ ID474266 15 Jan 2020
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the r
FAQ ID63686 15 Jan 2020
Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support C
FAQ ID63266 15 Jan 2020
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can
FAQ ID64561 15 Jan 2020
What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 TekVPI DPO4000/DPO4000B TekVPI DPO5000 / DPO5000B TekVPI DPO7000 TekVPI DPO70000/DPO70000B/DPO70000C TekConnect DSA70000/D
FAQ ID64251 15 Jan 2020
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689-00 TDS3000/TDS3000B/TDS3000C RM3000 DPO2000 RMD2000 MSO2000 RMD2000 DPO3
FAQ ID64571 15 Jan 2020
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital
FAQ ID60306 15 Jan 2020
On my TPS2000 series oscilloscope the BNCs are damaged or worn out.  Can I replace them myself?
Yes, you can replace them.  Order a BNC replacment kit Tektronix part number 050374800 for a TPS2000B series or order 050359800 if it is a TPS2000 non-B series.  The kits includes instructions for replacement. You can also view the video below which
FAQ ID64861 15 Jan 2020
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the
FAQ ID64791 15 Jan 2020
Why does Math work differently between my older TDS200 or TDS1000/2000 series oscilloscope+ and my newer TDS1000B/2000B series oscilloscope?
The way to calculate math was different in the older TDS200 and TDS1000/2000 series oscilloscopes then most other oscilloscopes, including the new TDS1000B/2000B series.The older instruments used a method that could be called Display Math. In Display
FAQ ID64386 30 Dec 2019
What operating system does the TDS1000B+ TDS2000B+ TPS2000+ MSO/DPO2000+ TDS3000C+ MSO/DPO3000 and MSO/DPO4000 use? And are they susceptible to viruses?
The above oscilloscopes use closed embedded real-time operating systems and do not have the capability to create, modify, run or save programs that are on a USB device or LAN .  Therefore, they are not susceptible to virus attacks and cannot spread v
FAQ ID56996 30 Dec 2019
I am using the TPS2024 with the current probe A622. The scope is measuring the charging current of a capacitor+ the reading of the RMS and Frequency is not shown and all that is displaying are question marks. What is the set up so the scope can make these measurements?
The best solution is to use the TPS2PWR1 Power Measurement Application software module. Using the Power Application module we find the Cycle RMS value, 383 mV, and Frequency is 60.02 Hz If you do not have the Power Application module a work arou
FAQ ID58346 30 Dec 2019
What are the TDS2000B TV-sync triggering selections and which Standards are supported? Are these features optional or are they provided with the instrument?
The TDS2000B TV sync selections are Line Number, Odd field, Even field, All Fields and All Lines. The supported Standards are NTSC and PAL/SECAM. There is no TV trigger option available and no additional cost for these features. The TV trigger featur
FAQ ID64041 30 Dec 2019
Can Tektronix Digital Storage Oscilloscopes export XY Display mode waveform data in a single file?
Tektronix Digital Storage Oscilloscopes XY Display mode waveform data is displayed by taking the voltage amplitude portion of the real-time YT voltage vs. time waveforms simultaneously acquired on channel 1 and channel 2 (or channel 3 an 4 on some mo
FAQ ID59141 30 Dec 2019
Does the P2220 probe replace the P2200 probe?
Yes. The P2220 probe is compatible with TDS1000 and TDS2000 Series as well as the TPS2000 Series. The P2200 probe and other standard single-ended passive probes cannot be used with the TPS2000 Series because safe operation of the TPS2000 Series isola
FAQ ID58196 30 Dec 2019
Is the Windows 7 driver for the RS232 to USB cable adapter (p/n:174-5813-00) available?
The driver for the adapter 174-5813-00 for Windows 7 support is available from its chip vendor at here. 
FAQ ID64476 30 Dec 2019
Can I download waveform data and screenshots to my computer by using HyperTerminal?
Yes you can. Use the first procedure to get waveform data, and the second to get a screenshot. For both Waveform data and screenshots, setup Hyperterm for communication. If you want to see the characters you type in the window (recommended), then you
FAQ ID58076 30 Dec 2019
Do you offer a RS232 to a USB cable adapter?
Yes.  This can be ordered as part number 174-5813-00.
FAQ ID64446 30 Dec 2019
Do you offer a RS232 to a USB cable adapter?
Yes.  This can be ordered as part number 174-5813-00.
FAQ ID59281 30 Dec 2019
正確で信頼できる波形取込 デジタル・リアルタイム・サンプリング技術(DRT)

文書番号: 3GW-17741-0
入門書 26 Dec 2019
TDS2000B シリーズ操作ガイド
使用方法ガイド 26 Dec 2019
入門書オシロスコープのすべて
この入門書では、初めてオシロスコープを使用する方を対象に、オシロスコープの基本的な機能および操作方法について説明しています。 聞きなれない用語が出てきましたら、本書の末尾の用語集でその意味を確認してください。本書には、オシロスコープの動作原理や操作についての用語テストや選択式問題が掲載されているので、教材としても適しています。数学やエレクトロニクスの知識は必要ありません。 この入門書では、以下の項目について説明します。 ■ オシロスコープの動作原理 ■ さまざまなオシロスコープの違いについて

文書番号: 03Z-8605-7
入門書 26 Dec 2019
オシロスコープ 選定ガイド
テクトロニクスは、さまざまなアプリケーション、用途に対応したオシロスコープを数多くご用意しています。この選定ガイドでは、現在ご利用いた だけるさまざまな種類のオシロスコープの概要と、ニーズに合った正しいオシロスコープの選定の手助けになるよう、選定の際に考慮すべき主要性能や機能、各シリーズ間の主な違いをご説明しています。

文書番号: 46W-31080-7
選択ガイド 26 Dec 2019
TPS2000B シリーズ ユーザ・マニュアル
デジタル・ストレージ・オシロスコープ User Manual

部品番号: 071273800
Manual 25 Dec 2019
TPS2000B シリーズ ユーザ・マニュアル
デジタル・ストレージ・オシロスコープ

部品番号: 077138401
Manual 25 Dec 2019
TPS2000シリーズ ユーザ・マニュアル
デジタル・ストレージ・オシロスコープ User Manual

部品番号: 071144604
Manual 25 Dec 2019
TPS2000B シリーズ ユーザ・マニュアル
デジタル・ストレージ・オシロスコープ

部品番号: 077138400
Manual 25 Dec 2019
Can the trigger signal frequency readout provide frequency measurements greater than the rated bandwidth of the oscilloscope?
Yes; however, this depends on the available signal strength.
FAQ ID58131 27 Nov 2019
What is the difference between digital real-time (DRT) sampling technology used in the TPS2000 Series and equivalent time sampling (ET) technology used by other manufacturers in the market?
Sample rate determines the highest frequency that can be captured in a single shot. For linear interpolation, the rule of thumb is that the sample rate must be 10 times higher than the highest frequency to be captured for a waveform to be reproduced
FAQ ID58751 27 Nov 2019
Does the TPS2000 Series use an industry-standard battery (available locally)?
No. To ensure proper instrument performance, you should purchase the batteries only from Tektronix.
FAQ ID58211 27 Nov 2019
What are the differences between the two frequency measurements that the TPS2000 Series makes?
Automatic Frequency Measurement Method used to make measurement: Reciprocal of the Period measurement. Made over the first complete cycle in the record. Period measured from the first mid-ref crossing to the third mid-ref crossing Accuracy (typical)
FAQ ID58636 27 Nov 2019
Is the isolation maintained when using the AC Adapter?
Yes. Full isolation is maintained.
FAQ ID58501 27 Nov 2019
Is there a special operating mode that enables me to get 8 hours of battery operation in the TPS2000 Series?
No, there is no low-power setting as on some products because TPS2000 monitors the remaining battery life. With two fully charged batteries, the product can operate for up to 8 hours even with the front panel backlights operating. In addition, the ba
FAQ ID58511 27 Nov 2019
Are Tektronix current probes compatible with the TPS2000 series oscilloscopes?
Yes, here is the list for the recommended current probes. A621 5 - 50 kHz AC current probe, 2000A A622 DC - 100kHz AC/DC current probe, 100A P6021 120Hz - 60 MHz AC current probe, 15A P6022 935 Hz - 120MHz AC current probe, 6A TCP202 (requires 1103
FAQ ID58041 27 Nov 2019
What is the charging time for the TPS2000 series batteries?
Batteries can be charged either in the instrument or in the optional TPSCHG external charger. In the external charger, a battery will charge in 3 hours. When AC power is supplied to the TPS2000, a battery will charge in about 4.5 hours if the instr
FAQ ID58736 27 Nov 2019
How do I upgrade the TPS2000 series oscilloscope firmware?
UPGRADE PROCEDURE You will need a CompactFlash reader and a CompactFlash card connected to your computer. Download this version of firmware to your PC by pressing the "Download" button on the Firmware Update for the TPS2000 Series page and following
FAQ ID57346 27 Nov 2019
Does turning off the TPS2000 front-panel backlights make the batteries last longer?
Yes, but only about 10 minutes longer.
FAQ ID58216 27 Nov 2019
On the TPS2000+ when do I use the multipurpose knob and when do I press the bezel buttons to change settings?
You use the multipurpose knob when the indicator light associated with the knob is lit (e.g., cursor position in the cursor menu). If the light is not lit, select on or off operations by pressing the bezel button (e.g., measurement type in the measur
FAQ ID58556 27 Nov 2019
I have a TDS3034B with the battery and charger. Can I use this battery and charger with the TPS2000 scopes?
No, the batteries and charger for the TDS3000 and TDS3000B series will not work with the TPS2000 series. The TPS2000 series batteries and the charger are unique and are designed specifically for this series.
FAQ ID58371 27 Nov 2019
How high can I float the TPS2000 series oscilloscopes?
The input to the scope can accept up to 600 VRMS CAT II or 300 VRMS CAT III BNC shell to earth ground, 1200 VRMS CAT II between any two channel commons with each of the channel commons not being more than +/- 600 VRMS from earth ground. The P2220 pro
FAQ ID58321 27 Nov 2019
When the TPS2000 series scope is plugged into an AC power source+ there is no indication that the unit is running on AC power. Is this also true when the unit is running on its battery?
When the unit is plugged into AC power, there is no indicator light. However, there is an indicator light on the unit when the battery is being charged in the instrument (i.e., the instrument is connected to AC power and the battery[ies] is [are] not
FAQ ID58946 27 Nov 2019
How do I turn the TPS2000 front-panel backlight on or off?
Press the Utility menu button and then the Options bezel button. The top bezel button toggles the backlight on and off.
FAQ ID58296 27 Nov 2019
I want to trigger on the primary frequency (perhaps 60 Hz)+ this frequency is modulated with the motor frequency (perhaps 600 Hz) with an amplitude of perhaps a third of the primary frequency's amplitude. The scope will not adequately trigger on the motor current signal.
This signal creates Multiple zero crossings which makes the triggering unstable. Turn down the amplitude of the composite signal (ch1) so that the scope's built in hysteresis will swamp out the motor drive zero crossings. This channel will be used t
FAQ ID58436 27 Nov 2019
The TPS2000 series scope is powered by rechargeable batteries+ is a battery charger included with the scope?
The batteries are charged by the scope internally when it is connected to the AC outlet. There is an external charger available but it is not included with the scope. The part number is TPSCHG, ( External battery charger for TPS2000 Series oscillos
FAQ ID58581 27 Nov 2019
In reference to the TPS2000 + what do you mean by "hot-swappable" batteries?
While the product is running on one battery, you can install another fully charged battery without having to turn off the oscilloscope or interrupt normal operation. (The oscilloscope drains only one battery at a time and the lowest-capacity battery
FAQ ID58451 27 Nov 2019
How do I know how much battery charge is left in the TPS2000 batteries?
There is a Battery Status menu found under the Utility menu System status. Notes indicate whether battery 1 and battery 2 are installed and the time remaining on each battery.
FAQ ID58281 27 Nov 2019
I can not get a screenshot of the full trace in XY mode. How do I save the full trace?
When saving a screenshot, sometimes only a portion of the XY trace will show:You can get the full waveform by turning on persistence in the Display menu:  
FAQ ID63676 27 Nov 2019
Can I operate the TPS2000 series oscilloscope on AC power without a battery installed?
Yes. The AC adapter supplies 15V DC to power the instruments so that no battery is required.
FAQ ID58091 27 Nov 2019
Do I have to put the battery in slot 1 if I'm using only one battery?
No, the two slots are identical.
FAQ ID58146 27 Nov 2019
I have a previous version of Open Choice Desktop software loaded on my PC. Do I need a new version to work with the TPS2000?
You can upgrade the software by using the version supplied with the TPS2000 oscilloscope.You can also download an upgraded version of the Open Choice Desktop from the Tektronix Web site. (This contains two distinct pieces of software: TekVISA and Op
FAQ ID58366 27 Nov 2019
Are the TPS2000 oscilloscope BNC inputs (and external trigger) isolated from the I/O ports on the back of the instrument?
Yes. For example, you can use OpenChoice® PC connectivity software with the TPS2000 series while making floating measurements (within the specified instrument and probe limits), and the optional WaveStar software can be used for fully programmable re
FAQ ID58046 27 Nov 2019
I need a printer which will work with the TPS2000 series. Which one should I purchase?
An alternate method to using a printer with a Centronics port is purchase a printer which can read a compact flash card. Then you can save your pictures to TPS2000 compact flash card then print them direct from the printer, no cable required. The on
FAQ ID57401 27 Nov 2019
On the TPS2000+ where is the trigger point when the pulse width trigger is used and a specified amount of time is selected?
Equal: Oscilloscope triggers when trailing edge of the pulse crosses the trigger level. Not equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues
FAQ ID58561 27 Nov 2019
My TPS2024 with the Power Application module installed the Harmonics selection does not properly measure the harmonics on my waveform.
The following shows an example of a waveform with harmonics. If the secondary frequency is not an exact multiple of the fundamental the scope may display mixed results. The recommendation is to change the Setup selection in the Harmonics menu from
FAQ ID58541 27 Nov 2019
My TPS2000 scope was running FV:V10.14 and I updated to FV:V10.20. I notice the cooling fan is running much faster now. Is this situation correct?
Yes, the fan has 3 speeds: fast, slow, and off. With the new firmware there were changes made to the fan algorithm. Also when the instrument is powered up the fan start up is at high speed. Speed changes can be adjusted once a minute. The scope al
FAQ ID57566 27 Nov 2019
I plan to measure Motor Drive signals with a TPS2024. Cat II & Cat III confuse me. What exactly is this?
CAT ratings are industry-standard category safety ratings, Test instruments are rated on their ability to withstand a voltage spike which are applied through a specified level of resistance. The installation categories are: CAT III Distribution-lev
FAQ ID57411 27 Nov 2019
050-3642-00 and Above Instructions
Backlight Inverter Board Replacement Kit for TPS2000 Series Oscilloscopes Instructions

部品番号: 075093400
Manual 26 Nov 2019
P2220 Probe Safety Warning Sheet
1X/10X MHz Passive Probe Other

部品番号: 063380400
Manual 26 Nov 2019
Read This First
TPS2000B Series Oscilloscopes available documentation and applications

部品番号: 061442600
Manual 26 Nov 2019
TPS2000B Series
Digital Storage Oscilloscopes Service Manual

部品番号: 077044700
Manual 26 Nov 2019
TPS2000B Series
Oscilloscope Safety and Compliance

部品番号: 071354300
Manual 26 Nov 2019
TPS2000 BNC Instructions
Replacement Kit Instructions

部品番号: 063382900
Manual 26 Nov 2019
TPS2000 Series Important Information
TPS2000 Series Important Information Other

部品番号: 071170202
Manual 26 Nov 2019
TPS2000 Series Read This First
Oscilloscope User Manual Changes Read This First

部品番号: 063378900
Manual 26 Nov 2019
TPS2000/B BNC
Replacement Kit Instructions

部品番号: 071289500
Manual 26 Nov 2019
TPS2000B Series
Digital Storage Oscilloscopes

部品番号: 077044702
Manual 26 Nov 2019
TPS2000B Series
Oscilloscope Safety and Compliance

部品番号: 071354302
Manual 26 Nov 2019
TPS2000B Series
Digital Storage Oscilloscopes

部品番号: 077044701
Manual 26 Nov 2019
Memory Erasure and Memory Parts List Instructions
TDS200, TDS1000/2000 & TPS2000 Series Digital Storage Oscilloscopes Instructions

部品番号: 071185700
Manual 26 Nov 2019
TDS200, TDS1000/TDS2000, TDS1000B/TDS2000B, and TPS2000 Programmer
Digital Storage Oscilloscopes

部品番号: 071107504
Manual 26 Nov 2019
TDS200, TDS1000/2000, TDS1000B/2000B, TDS1000C-EDU/TDS2000C, TPS2000/TPS2000B Series
Digital Oscilloscope Programmer Manual

部品番号: 077044401
Manual 26 Nov 2019
TBS1000B, TBS1000, TDS200, TDS1000/2000, TDS1000B/2000B, TDS1000C-EDU/TDS2000C, TDS2024C, TPS2000/TPS2000B Series
Digital Oscilloscope Programmer Manual

部品番号: 077044403
Manual 26 Nov 2019
TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series
Digital Storage Oscilloscope Declassification and Security Instructions Instructions

部品番号: 077044500
Manual 26 Nov 2019
TBS1000, TBS1000B/TBS1000B-EDU, TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series
Digital Storage Oscilloscope Declassification and Security Instructions Instructions

部品番号: 077077102
Manual 26 Nov 2019
Digital Storage Oscilloscopes
The TPS2000B Series offers a distinctive range of capabilities in an oscilloscope with controls and menus you will find familiar and easy to use. Available in 2- or 4-channel versions, the TPS2000B Series with IsolatedChannel™ technology provides is

文書番号: 3MW-17750-14
Datasheet 04 Feb 2020
LabVIEW SignalExpress Step for TDS1000B, B-SC, C, C-EDU, TDS2000B, C
This Step provides the capability to connect, control and log data from the TDS1000B, B-SC, C and C-EDU; TDS2000B and C; and TPS2000B series instruments from the Signal Express Environment.

部品番号: 066130301
Software 04 Feb 2020
FIRMWARE UPDATE FOR TPS2000 and TPS2000B models
This firmware v11.09 is compatible with all TPS2000 and some TPS2000B models. See release notes for detailed Serial Number information on which TPS2000B models are supported by this firmware. All other TPS2000B models either contain the latest firmwa

部品番号: 066139100
Software 04 Feb 2020
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various c

部品番号: 066093812
Software 04 Feb 2020
Tektronix Openchoice Desktop Application TDSPCS1 - v2.6
The Tektronix OpenChoice Desktop free application lets you capture oscilloscope screen images, waveform data, and settings from a Microsoft Windows computer. After installing the software, refer to the section “Connecting to a PC” in your instrument’

部品番号: 066093914
Software 04 Feb 2020
Tektronix Toolbars for Microsoft Office 32 bit - V4.0.4
Tektronix Toolbars for Microsoft Office v4.0.4 provide toolbars (add-ins) for the 32 bit versions of Microsoft Excel and Microsoft Word. This version of Toolbars requires OpenChoice TekVISA v4.0.4 (Part Number 066093809) to be preinstalled on the PC

部品番号: 066133202
Software 04 Feb 2020
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various

部品番号: 066093809
Software 04 Feb 2020
TEKVISA CONNECTIVITY SOFTWARE - V4.1.1
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various c

部品番号: 066093811
Software 04 Feb 2020
Be Sure to Capture the Complete Picture
If an oscilloscope's sample rate isn't fast enough, transient signal details are lost, resulting in errors. Digital real-time oscilloscopes acquire signals in real time, capturing enough samples of the signal needed to faithfully reconstruct a wavefo

文書番号: 3GK-17741-0
アプリケーション・ノート 04 Feb 2020
New Approach to Quick, Accurate, Affordable Floating Measurements
Engineers and technicians often need to make “floating” measurements where neither point of the measurement is at ground(earth) potential. This measurement is often referred to as a differential measurement. “Signal common” may be elevated tohundreds

文書番号: 3MW-17773-1
アプリケーション・ノート 04 Feb 2020
Fundamentals of Floating Measurements and Isolated Input Oscilloscopes
This guide will provide you with a fundamental glossary of power measurement terms, explain the different options available for making floating measurements, and highlight the advantages and trade-offs of each option.

文書番号: 3AW-19134-2
アプリケーション・ノート 04 Feb 2020
Tektronix Probe Selection Guide
Tektronix probes ensure the highest signal fidelity possible from your device-under-test to your oscilloscope. With over 100 probe choices available, all perfectly matched to our industry-leading oscilloscopes, you can find the probe you need for yo

文書番号: 60W_14232_10
製品選択ガイド 04 Feb 2020
Can I convert my wfm files to an open format+ such as a CSV (comma separated values) file?
You can use one of the following three WFM to ASCII converters. Converter for TDSxxx - works with files created by TDSx00 series (for example, TDS500 series) Converter for TDS5xxx,TDS6xxx, TDS7xxx, DPO7xxx,DPO70xxx, DSA70xxx Converter for the TDS
FAQ ID56386 15 Jan 2020
How do I declassify or sanitize my instrument?
Declassification and Security documents for many Tektronix products are located in the Download, Manuals and Documentation on Tek.com.  /node/7106.  Enter your instrument model number and select Download Type as "Manuals".  At the results screen, on
FAQ ID55686 15 Jan 2020
Can I look at and measure an instantaneous power waveform?
With the TPS2000's math multiply function, you can easily multiply a voltage and current waveform to obtain an instantaneous power waveform. You can independently scale this math waveform for optimized viewing. In addition, you can make power measure
FAQ ID58081 15 Jan 2020
Why does OpenChoice Desktop "Get Screen" operation time-out and display "Data transfer ended unexpectedly", when “Select Instrument”, “Get Data”, “Get & Send Settings” operations are successful?
When connecting to a TPS2000/B, TDS1000, TDS2000, or TDS3000/B series scopes with a Centronics parallel printer port using direct RS232, or RS232 to USB adapter, you must set the scope’s Printer Port to “RS232” (TDS1000/2000, TPS2000/B; Utility, Opti
FAQ ID64806 15 Jan 2020
What cart does my scope use?
Below are the Instrument Carts that can be purchased from Tektronix.                                         K4000                                                                             K420                              K475 More information can
FAQ ID64561 15 Jan 2020
What probe interface does my oscilloscope have?
Oscilloscope series Probe interface CSA7000/CSA7000B TekConnect DPO2000 TekVPI DPO3000 TekVPI DPO4000/DPO4000B TekVPI DPO5000 / DPO5000B TekVPI DPO7000 TekVPI DPO70000/DPO70000B/DPO70000C TekConnect DSA70000/D
FAQ ID64251 15 Jan 2020
What rackmount does my scope use?
Oscilloscope Family Rackmount TDS1000/TDS2000 RM2000 TDS1000B/TDS2000B/TDS2000C RM2000B TPS2000/TPS2000B No Rackmount - Strap hanger 343-1689-00 TDS3000/TDS3000B/TDS3000C RM3000 DPO2000 RMD2000 MSO2000 RMD2000 DPO3
FAQ ID64571 15 Jan 2020
I have never used an isolated channel oscilloscope+ what advantage can I expect to gain from it?
The TPS2000 Series 4 IsolatedChannel™ input architecture provides true and complete channel-to-channel isolation for both the positive input and the negative reference leads, including the external trigger input. Refer to the IsolatedChannel Technolo
FAQ ID58386 15 Jan 2020
I downloaded and Installed OpenChoice Desktop, but it doesn't recognize my scope.
Refer to the Prerequisites.txt file available to download on the same page for OpenChoice desktop. Make sure you have all the prerequisites specified.    Prerequisites 1. PC equipped with  Microsoft Windows 7 32 Bit and 64 Bit OS, Windows 8.1 32 Bit
FAQ ID474266 15 Jan 2020
Why Should My Signal Fit Within The Screen Of My Tektronix Oscilloscope?
Scaling your signal to fit within the screen will remove signal distortion caused by clipping. Clipping is caused by exceeding the limits of the instrument's input. Tektronix's digital oscilloscopes are designed such that each division is 25 digital
FAQ ID60306 15 Jan 2020
On my TPS2000 series oscilloscope the BNCs are damaged or worn out.  Can I replace them myself?
Yes, you can replace them.  Order a BNC replacment kit Tektronix part number 050374800 for a TPS2000B series or order 050359800 if it is a TPS2000 non-B series.  The kits includes instructions for replacement. You can also view the video below which
FAQ ID64861 15 Jan 2020
Programing - How do I get a Screen Capture from DPO4000 scope using Python?
There are a few things that are needed for programming with an oscilloscope. First it's important to have a copy of your oscilloscopes Programmers manual. This can be found be searching for manuals on Tek.com and specifying Programmers manual in the
FAQ ID64791 15 Jan 2020
I cannot see my signal on the Oscilloscope. What can I do?
You have many options to help diagnose this issue, below are a few suggestions to get started. If you find yourself needing more help, please connect with our Technical Support Center. You can get started by pressing the "Contact Us" button on the r
FAQ ID63686 15 Jan 2020
Can my oscilloscope operate on 400Hz power?
Most scopes have a wide range of operating voltages and frequencies, a full list can be found in the user manual of your specific oscilloscope. If you're having trouble finding your answer or can't find the manual, please call our Technical Support C
FAQ ID63266 15 Jan 2020
What operating system does the TDS1000B+ TDS2000B+ TPS2000+ MSO/DPO2000+ TDS3000C+ MSO/DPO3000 and MSO/DPO4000 use? And are they susceptible to viruses?
The above oscilloscopes use closed embedded real-time operating systems and do not have the capability to create, modify, run or save programs that are on a USB device or LAN .  Therefore, they are not susceptible to virus attacks and cannot spread v
FAQ ID56996 30 Dec 2019
I am using the TPS2024 with the current probe A622. The scope is measuring the charging current of a capacitor+ the reading of the RMS and Frequency is not shown and all that is displaying are question marks. What is the set up so the scope can make these measurements?
The best solution is to use the TPS2PWR1 Power Measurement Application software module. Using the Power Application module we find the Cycle RMS value, 383 mV, and Frequency is 60.02 Hz If you do not have the Power Application module a work arou
FAQ ID58346 30 Dec 2019
What are the TDS2000B TV-sync triggering selections and which Standards are supported? Are these features optional or are they provided with the instrument?
The TDS2000B TV sync selections are Line Number, Odd field, Even field, All Fields and All Lines. The supported Standards are NTSC and PAL/SECAM. There is no TV trigger option available and no additional cost for these features. The TV trigger featur
FAQ ID64041 30 Dec 2019
Why does Math work differently between my older TDS200 or TDS1000/2000 series oscilloscope+ and my newer TDS1000B/2000B series oscilloscope?
The way to calculate math was different in the older TDS200 and TDS1000/2000 series oscilloscopes then most other oscilloscopes, including the new TDS1000B/2000B series.The older instruments used a method that could be called Display Math. In Display
FAQ ID64386 30 Dec 2019
Is the Windows 7 driver for the RS232 to USB cable adapter (p/n:174-5813-00) available?
The driver for the adapter 174-5813-00 for Windows 7 support is available from its chip vendor at here. 
FAQ ID64476 30 Dec 2019
Can I download waveform data and screenshots to my computer by using HyperTerminal?
Yes you can. Use the first procedure to get waveform data, and the second to get a screenshot. For both Waveform data and screenshots, setup Hyperterm for communication. If you want to see the characters you type in the window (recommended), then you
FAQ ID58076 30 Dec 2019
Can Tektronix Digital Storage Oscilloscopes export XY Display mode waveform data in a single file?
Tektronix Digital Storage Oscilloscopes XY Display mode waveform data is displayed by taking the voltage amplitude portion of the real-time YT voltage vs. time waveforms simultaneously acquired on channel 1 and channel 2 (or channel 3 an 4 on some mo
FAQ ID59141 30 Dec 2019
Does the P2220 probe replace the P2200 probe?
Yes. The P2220 probe is compatible with TDS1000 and TDS2000 Series as well as the TPS2000 Series. The P2200 probe and other standard single-ended passive probes cannot be used with the TPS2000 Series because safe operation of the TPS2000 Series isola
FAQ ID58196 30 Dec 2019
Do you offer a RS232 to a USB cable adapter?
Yes.  This can be ordered as part number 174-5813-00.
FAQ ID64446 30 Dec 2019
Do you offer a RS232 to a USB cable adapter?
Yes.  This can be ordered as part number 174-5813-00.
FAQ ID59281 30 Dec 2019
正確で信頼できる波形取込 デジタル・リアルタイム・サンプリング技術(DRT)

文書番号: 3GW-17741-0
入門書 26 Dec 2019
TDS2000B シリーズ操作ガイド
使用方法ガイド 26 Dec 2019
入門書オシロスコープのすべて
この入門書では、初めてオシロスコープを使用する方を対象に、オシロスコープの基本的な機能および操作方法について説明しています。 聞きなれない用語が出てきましたら、本書の末尾の用語集でその意味を確認してください。本書には、オシロスコープの動作原理や操作についての用語テストや選択式問題が掲載されているので、教材としても適しています。数学やエレクトロニクスの知識は必要ありません。 この入門書では、以下の項目について説明します。 ■ オシロスコープの動作原理 ■ さまざまなオシロスコープの違いについて

文書番号: 03Z-8605-7
入門書 26 Dec 2019
オシロスコープ 選定ガイド
テクトロニクスは、さまざまなアプリケーション、用途に対応したオシロスコープを数多くご用意しています。この選定ガイドでは、現在ご利用いた だけるさまざまな種類のオシロスコープの概要と、ニーズに合った正しいオシロスコープの選定の手助けになるよう、選定の際に考慮すべき主要性能や機能、各シリーズ間の主な違いをご説明しています。

文書番号: 46W-31080-7
選択ガイド 26 Dec 2019
TPS2000B シリーズ ユーザ・マニュアル
デジタル・ストレージ・オシロスコープ User Manual

部品番号: 071273800
Manual 25 Dec 2019
TPS2000B シリーズ ユーザ・マニュアル
デジタル・ストレージ・オシロスコープ

部品番号: 077138401
Manual 25 Dec 2019
TPS2000シリーズ ユーザ・マニュアル
デジタル・ストレージ・オシロスコープ User Manual

部品番号: 071144604
Manual 25 Dec 2019
TPS2000B シリーズ ユーザ・マニュアル
デジタル・ストレージ・オシロスコープ

部品番号: 077138400
Manual 25 Dec 2019
Is the isolation maintained when using the AC Adapter?
Yes. Full isolation is maintained.
FAQ ID58501 27 Nov 2019
Is there a special operating mode that enables me to get 8 hours of battery operation in the TPS2000 Series?
No, there is no low-power setting as on some products because TPS2000 monitors the remaining battery life. With two fully charged batteries, the product can operate for up to 8 hours even with the front panel backlights operating. In addition, the ba
FAQ ID58511 27 Nov 2019
Are Tektronix current probes compatible with the TPS2000 series oscilloscopes?
Yes, here is the list for the recommended current probes. A621 5 - 50 kHz AC current probe, 2000A A622 DC - 100kHz AC/DC current probe, 100A P6021 120Hz - 60 MHz AC current probe, 15A P6022 935 Hz - 120MHz AC current probe, 6A TCP202 (requires 1103
FAQ ID58041 27 Nov 2019
What is the charging time for the TPS2000 series batteries?
Batteries can be charged either in the instrument or in the optional TPSCHG external charger. In the external charger, a battery will charge in 3 hours. When AC power is supplied to the TPS2000, a battery will charge in about 4.5 hours if the instr
FAQ ID58736 27 Nov 2019
I want to trigger on the primary frequency (perhaps 60 Hz)+ this frequency is modulated with the motor frequency (perhaps 600 Hz) with an amplitude of perhaps a third of the primary frequency's amplitude. The scope will not adequately trigger on the motor current signal.
This signal creates Multiple zero crossings which makes the triggering unstable. Turn down the amplitude of the composite signal (ch1) so that the scope's built in hysteresis will swamp out the motor drive zero crossings. This channel will be used t
FAQ ID58436 27 Nov 2019
The TPS2000 series scope is powered by rechargeable batteries+ is a battery charger included with the scope?
The batteries are charged by the scope internally when it is connected to the AC outlet. There is an external charger available but it is not included with the scope. The part number is TPSCHG, ( External battery charger for TPS2000 Series oscillos
FAQ ID58581 27 Nov 2019
In reference to the TPS2000 + what do you mean by "hot-swappable" batteries?
While the product is running on one battery, you can install another fully charged battery without having to turn off the oscilloscope or interrupt normal operation. (The oscilloscope drains only one battery at a time and the lowest-capacity battery
FAQ ID58451 27 Nov 2019
How do I upgrade the TPS2000 series oscilloscope firmware?
UPGRADE PROCEDURE You will need a CompactFlash reader and a CompactFlash card connected to your computer. Download this version of firmware to your PC by pressing the "Download" button on the Firmware Update for the TPS2000 Series page and following
FAQ ID57346 27 Nov 2019
Can I operate the TPS2000 series oscilloscope on AC power without a battery installed?
Yes. The AC adapter supplies 15V DC to power the instruments so that no battery is required.
FAQ ID58091 27 Nov 2019
I have a previous version of Open Choice Desktop software loaded on my PC. Do I need a new version to work with the TPS2000?
You can upgrade the software by using the version supplied with the TPS2000 oscilloscope.You can also download an upgraded version of the Open Choice Desktop from the Tektronix Web site. (This contains two distinct pieces of software: TekVISA and Op
FAQ ID58366 27 Nov 2019
Are the TPS2000 oscilloscope BNC inputs (and external trigger) isolated from the I/O ports on the back of the instrument?
Yes. For example, you can use OpenChoice® PC connectivity software with the TPS2000 series while making floating measurements (within the specified instrument and probe limits), and the optional WaveStar software can be used for fully programmable re
FAQ ID58046 27 Nov 2019
I need a printer which will work with the TPS2000 series. Which one should I purchase?
An alternate method to using a printer with a Centronics port is purchase a printer which can read a compact flash card. Then you can save your pictures to TPS2000 compact flash card then print them direct from the printer, no cable required. The on
FAQ ID57401 27 Nov 2019
On the TPS2000+ where is the trigger point when the pulse width trigger is used and a specified amount of time is selected?
Equal: Oscilloscope triggers when trailing edge of the pulse crosses the trigger level. Not equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues
FAQ ID58561 27 Nov 2019
How do I know how much battery charge is left in the TPS2000 batteries?
There is a Battery Status menu found under the Utility menu System status. Notes indicate whether battery 1 and battery 2 are installed and the time remaining on each battery.
FAQ ID58281 27 Nov 2019
I can not get a screenshot of the full trace in XY mode. How do I save the full trace?
When saving a screenshot, sometimes only a portion of the XY trace will show:You can get the full waveform by turning on persistence in the Display menu:  
FAQ ID63676 27 Nov 2019
Can the trigger signal frequency readout provide frequency measurements greater than the rated bandwidth of the oscilloscope?
Yes; however, this depends on the available signal strength.
FAQ ID58131 27 Nov 2019
What is the difference between digital real-time (DRT) sampling technology used in the TPS2000 Series and equivalent time sampling (ET) technology used by other manufacturers in the market?
Sample rate determines the highest frequency that can be captured in a single shot. For linear interpolation, the rule of thumb is that the sample rate must be 10 times higher than the highest frequency to be captured for a waveform to be reproduced
FAQ ID58751 27 Nov 2019
Do I have to put the battery in slot 1 if I'm using only one battery?
No, the two slots are identical.
FAQ ID58146 27 Nov 2019
My TPS2024 with the Power Application module installed the Harmonics selection does not properly measure the harmonics on my waveform.
The following shows an example of a waveform with harmonics. If the secondary frequency is not an exact multiple of the fundamental the scope may display mixed results. The recommendation is to change the Setup selection in the Harmonics menu from
FAQ ID58541 27 Nov 2019
My TPS2000 scope was running FV:V10.14 and I updated to FV:V10.20. I notice the cooling fan is running much faster now. Is this situation correct?
Yes, the fan has 3 speeds: fast, slow, and off. With the new firmware there were changes made to the fan algorithm. Also when the instrument is powered up the fan start up is at high speed. Speed changes can be adjusted once a minute. The scope al
FAQ ID57566 27 Nov 2019
I plan to measure Motor Drive signals with a TPS2024. Cat II & Cat III confuse me. What exactly is this?
CAT ratings are industry-standard category safety ratings, Test instruments are rated on their ability to withstand a voltage spike which are applied through a specified level of resistance. The installation categories are: CAT III Distribution-lev
FAQ ID57411 27 Nov 2019
Does turning off the TPS2000 front-panel backlights make the batteries last longer?
Yes, but only about 10 minutes longer.
FAQ ID58216 27 Nov 2019
On the TPS2000+ when do I use the multipurpose knob and when do I press the bezel buttons to change settings?
You use the multipurpose knob when the indicator light associated with the knob is lit (e.g., cursor position in the cursor menu). If the light is not lit, select on or off operations by pressing the bezel button (e.g., measurement type in the measur
FAQ ID58556 27 Nov 2019
I have a TDS3034B with the battery and charger. Can I use this battery and charger with the TPS2000 scopes?
No, the batteries and charger for the TDS3000 and TDS3000B series will not work with the TPS2000 series. The TPS2000 series batteries and the charger are unique and are designed specifically for this series.
FAQ ID58371 27 Nov 2019
How high can I float the TPS2000 series oscilloscopes?
The input to the scope can accept up to 600 VRMS CAT II or 300 VRMS CAT III BNC shell to earth ground, 1200 VRMS CAT II between any two channel commons with each of the channel commons not being more than +/- 600 VRMS from earth ground. The P2220 pro
FAQ ID58321 27 Nov 2019
When the TPS2000 series scope is plugged into an AC power source+ there is no indication that the unit is running on AC power. Is this also true when the unit is running on its battery?
When the unit is plugged into AC power, there is no indicator light. However, there is an indicator light on the unit when the battery is being charged in the instrument (i.e., the instrument is connected to AC power and the battery[ies] is [are] not
FAQ ID58946 27 Nov 2019
How do I turn the TPS2000 front-panel backlight on or off?
Press the Utility menu button and then the Options bezel button. The top bezel button toggles the backlight on and off.
FAQ ID58296 27 Nov 2019
Does the TPS2000 Series use an industry-standard battery (available locally)?
No. To ensure proper instrument performance, you should purchase the batteries only from Tektronix.
FAQ ID58211 27 Nov 2019
What are the differences between the two frequency measurements that the TPS2000 Series makes?
Automatic Frequency Measurement Method used to make measurement: Reciprocal of the Period measurement. Made over the first complete cycle in the record. Period measured from the first mid-ref crossing to the third mid-ref crossing Accuracy (typical)
FAQ ID58636 27 Nov 2019
050-3642-00 and Above Instructions
Backlight Inverter Board Replacement Kit for TPS2000 Series Oscilloscopes Instructions

部品番号: 075093400
Manual 26 Nov 2019
P2220 Probe Safety Warning Sheet
1X/10X MHz Passive Probe Other

部品番号: 063380400
Manual 26 Nov 2019
Read This First
TPS2000B Series Oscilloscopes available documentation and applications

部品番号: 061442600
Manual 26 Nov 2019
TPS2000B Series
Digital Storage Oscilloscopes Service Manual

部品番号: 077044700
Manual 26 Nov 2019
TPS2000B Series
Oscilloscope Safety and Compliance

部品番号: 071354300
Manual 26 Nov 2019
TPS2000 BNC Instructions
Replacement Kit Instructions

部品番号: 063382900
Manual 26 Nov 2019
TPS2000 Series Important Information
TPS2000 Series Important Information Other

部品番号: 071170202
Manual 26 Nov 2019
TPS2000 Series Read This First
Oscilloscope User Manual Changes Read This First

部品番号: 063378900
Manual 26 Nov 2019
TPS2000/B BNC
Replacement Kit Instructions

部品番号: 071289500
Manual 26 Nov 2019
TPS2000B Series
Digital Storage Oscilloscopes

部品番号: 077044702
Manual 26 Nov 2019
TPS2000B Series
Oscilloscope Safety and Compliance

部品番号: 071354302
Manual 26 Nov 2019
TPS2000B Series
Digital Storage Oscilloscopes

部品番号: 077044701
Manual 26 Nov 2019
Memory Erasure and Memory Parts List Instructions
TDS200, TDS1000/2000 & TPS2000 Series Digital Storage Oscilloscopes Instructions

部品番号: 071185700
Manual 26 Nov 2019
TDS200, TDS1000/TDS2000, TDS1000B/TDS2000B, and TPS2000 Programmer
Digital Storage Oscilloscopes

部品番号: 071107504
Manual 26 Nov 2019
TDS200, TDS1000/2000, TDS1000B/2000B, TDS1000C-EDU/TDS2000C, TPS2000/TPS2000B Series
Digital Oscilloscope Programmer Manual

部品番号: 077044401
Manual 26 Nov 2019
TBS1000B, TBS1000, TDS200, TDS1000/2000, TDS1000B/2000B, TDS1000C-EDU/TDS2000C, TDS2024C, TPS2000/TPS2000B Series
Digital Oscilloscope Programmer Manual

部品番号: 077044403
Manual 26 Nov 2019
TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series
Digital Storage Oscilloscope Declassification and Security Instructions Instructions

部品番号: 077044500
Manual 26 Nov 2019
TBS1000, TBS1000B/TBS1000B-EDU, TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and TPS2000B Series
Digital Storage Oscilloscope Declassification and Security Instructions Instructions

部品番号: 077077102
Manual 26 Nov 2019