Adaptive Power Optimization is Revolutionizing PMICs
“There is no better way to save energy and cut bills than by turning all electronic devices off.”
This basic piece of advice is the underlying principle and philosophy behind any form of energy management applied to energy consumption optimization, and in general in so-called adaptive power optimization.
In the case of battery powered …
Energy storage device testing is not the same as battery testing. There are, in fact, several devices that are able to convert chemical energy into electrical energy and store that energy, making it available when required.
Capacitors are energy storage devices; they store electrical energy and deliver high specific power, being charged, and discharged in shorter time than batteries, yet with …
Tektronix has been a leader in developing cutting-edge oscilloscope probe technology for nearly 30 years. The infographic below highlights some of the key innovations and probe features we’ve developed in the last few decades. From low noise, low loading, and high bandwidth power rail probes to low input capacitance, high voltage single ended probes, our portfolio is designed to help engineers …
Basic Parameters for Choosing an Oscilloscope
Oscilloscope Bandwidth
Bandwidth is a key spec that determines the highest frequency your oscilloscope can measure accurately. It's a vital consideration affecting both the functionality and cost of the oscilloscope.
The higher the bandwidth, the more accurate the reproduction of your signal, as illustrated with a signal captured at 250 MHz, 1 GHz …
An oscilloscope, formerly known as an oscillograph, is an instrument that graphically displays electrical signals and shows how those signals change over time. It measures these signals by connecting with a sensor, which is a device that creates an electrical signal in response to physical stimuli like sound, light and heat. For instance, a microphone is a sensor that converts sound into an …
Failing EMI compliance testing can be a design engineer’s worst nightmare. Additional compliance testing costs, external lab testing, debug engineering time, and in some cases, board spins can add significant costs and time delays to your project. Unfortunately, for companies new to EMI/EMC, estimating compliance testing cost can be somewhat challenging. In this blog, we’ll provide information on …
