お問い合わせ

製品購入に関するご質問 ライブ・チャット:午前9時~午後4時まで

-

- 1-800-833-9200

全社でリモートワークをしております。 お問い合わせは右記お問い合わせ窓口(Web)をご利用ください。

ダウンロード

マニュアル、データシート、ソフトウェアなどのダウンロード:

ダウンロード・タイプ
型名またはキーワード

フィードバック

シリアル・データ・リンク解析(SDLA)

信号周波数の高速化と振幅の縮小に伴い、コンピュータ/通信/メモリ・バスのテストでは数多くの問題が発生しています。 テクトロニクスの最新のシリアル・データ・リンク解析ソリューションは、製品の市場投入前に必要な特性評価、コンプライアンス、デバッグをシームレスにつなぎます。

Title
Validation & Analysis of Complex Serial Bus Link Models (DesignCon 2013)
This paper highlights an application framework for performing serial data link modeling and analysis using live waveforms on a real-time oscilloscope. It then introduces a method for re-sampling S …
Correlation of Measurement and Simulation Results using IBIS-AMI Models on Measurement Instruments (DesignCon 2014)
Increasing serial bus data rates have resulted in requirements for de-embedding measurement circuits, embedding compliance channels, and applying reference equalizers to open closed data eyes for …
DesignCon 2015 Paper – Hybrid Modeled Measured Characterization of a 320 Gbit/s Backplane System
This paper explores a case study of a multilane Ethernet backplane 320 Gbit/s system that is difficult to fully measure and deembed, implements a hybrid method of modeling, deembedding, and …
Equalization and Serial Data Link Analysis Methods (SDLA) with 80SJNB Advanced Application Note
This application note describes test and measurement methodology used by serial data standards running on lossy/dispersive channels which close the eye diagram at the receiver, and where equalization …
Serial Data Link Analysis
SDLA Visualizer software provides extensive capability for computing embed and de-embed filters for real-time measurement and simulation. This application note focuses on the embed and de-embed …
Title
Using SDLA Visualizer
Learn how to open closed eyes using equalization techniques and how to de-embed reflections and loss caused by the measurement setup using SDLA Visualizer for Tektronix Real-Time Oscilloscopes.
How to Address Your Toughest Serial Bus Design Challenges with EDA and Measurement Correlation
This Tektronix webinar will teach engineers how to use modeling tools to correlate simulations with high-speed physical layer measurements on Serial Bus Standards using the DPO/MSO70000 Series …
TDR Analysis for S Parameter Creation
This webinar reviews TDR basics and the ability to create S-parameters using TDR/TDT measurements to validate high speed channels for debug or de-embedding in a Serial Data Link Analysis application.
Advanced Jitter and Noise Analysis
 As serial data speeds increase, the need to perform accurate timing and jitter measurements is key to staying current in your design role. Check out this new webinar that covers advances in the …