パワー測定/解析

今日の効率的なパワー・コンバータでは、出力1ワット当たりで少ない入力電力を求められていますが、電源測定でも数多くの要求事項があります。ここでは、以下についてご確認ください。

  • リップル測定とノイズ解析
  • IEC61000-3-2のプリコンプライアンスに対応した力率と高調波測定
  • レベルVIの効率性規格に対応したテスト
  • 待機電力テストによるIEC62301 Ed.2への対応
  • GaN、SiC FET、ダイオードの特性評価
  • MOSFETのスイッチング損失と安全動作領域解析
  • インサーキット・インダクタとトランスの損失測定

 

コンテンツ

推奨機器

ライブラリ

Title
Measuring Wireless Power Charging Systems for Portable Electronics

Learn how to observe power transfer signals and communications signals on a Qi wireless power charging system using a mixed domain oscilloscope.

8チャンネル・オシロスコープによる電源シーケンスの検証

You’ll learn the basics of checking the power-on and power-off sequence of an AC-DC power supply, how to look at a bulk supply and various point of load regulators, and how an oscilloscope with more than 4 channels can expedite the process.

Panasonic Semiconductor Solutions Case Study

Panasonic turns to IsoVu Technology to shorten development time for new GaN device.

Testing a New Switch Mode Power Supply Design Poster

This poster gives an overview of key measurements on a new switch mode power supply (SMPS) design, from initial startup, to optimizing switching and magnetic losses, to validating overall performance  and getting ready for regulatory compliance.

Isolation Addresses Common Sources of Differential Measurement Error

Technical brief that examines sources of measurement error and how the IsoVu measurement system can overcome these limitations.

IsoVu Technology White Paper

Learn how IsoVuTM Isolated Measurement Systems use a unique form of optical isolatoin to deliver bandwidth up to 1 GHz, extraordinary common mode rejection ratio of 120 dB at 100 MHz, and now differential voltage range up to 1000 V.

Measuring Vgs on Wide Bandgap Semiconductors

This application note focuses on accurate high-side VGS measurements on ungrounded FETs using the IsoVu measurement system. 

Active Power Factor Correction Verification Measurements

Learn techniques for measuring the effectiveness of a power factor correction circuit, both in terms of power factor improvement and reduction of current harmonics, using an oscilloscope.

Performing Safe Operating Area Analysis on MOSFETs and Other Switching Devices with an Oscilloscope

A safe operating area (SOA) plot represents maximum voltage, current, and power values for a MOSFET or other switching device.  Learn how to take measurements to compare in-circuit operating parameters to the SOA in component datasheets.

11 Power Consumption Measurement Techniques

This e-guide describes the top 11 power management challenges that you can face when designing, validating, or testing your IoT device and offers some tips on how to simplify the process and ultimately enable the success of your IoT device. 

 

A 2450 SourceMeter SMU Instrument will be programmed to discharge a battery and…

4:15

See measurements that were previously in possible in this video, where we take a…

4:40

Watch this step-by-step demonstration of how to configure the DMM7510 to perform…

4:15

Discover how to find cursors and use statistics tools to estimated power &…

2:59

There’s much more to choosing a DMM than just its number of digits. With…

1:27

View this video to learn how to efficiently take power supply measurements

4:48

Floating measurement in power applications is challenging due to safety and…

3:08

Lean how to make accurate standby power measurements on electrical equipment.…

2:56

This short video reviews the 6 essential products for extreme power electronics…

5:01
Title
Power Probing Techniques and Tips
Power Probing Techniques and Tips
How to Design Longer Battery Life in Mobile Computing Devices

This Tektronix Webinar discusses current monitoring over time to assess a semiconductor system's power performance with an emphasis on higher accuracy. In this 35 minute instructional webinar, engineers can learn how to validate a semiconductor's ability to preserve as much battery life as possible when placed in mobile computing devices.

Additional product info: 2400 Series SMU's  and  2300 Series DC Power Supplies

ダウンロード
ダウンロード

マニュアル、データシート、ソフトウェアなどのダウンロード:

Go to top